ericem Posted June 15, 2007 Share Posted June 15, 2007 I went to my dealer and asked about the crappy fuel economy, and was told that the NGK platinum plugs could be a problem something about the resistance. I was talkign to a guy at from desk not a mechanic. I also found out that the throttle body cleaner leaves residue on the MAF sensor, and i sprayed my MAF very well with throttle body cleaner, so ill get some brake cleaner to clean it off now see if that brings it up again. Because i was getting 400+km a tank now im getting 300-350 then get the yellow light. Link to comment Share on other sites More sharing options...
porcupine73 Posted June 15, 2007 Share Posted June 15, 2007 Hm..never heard that about the platinum plugs before. Sounds like misinfo to me. NGK lists a whole bunch of their spark plug models for Subaru's, including platinum in non-turbo applications. What brand throttle cleaner did you use to clean the MAF? If it contains any type of oil/lubricant that would be a problem. There are specific 'maf cleaners' but a non-chlor brake cleaner should work good. Those usually have non residue leaving items such as xylene, toluene, acetone, mek, etc. A chlorinated cleaner would probably work too but chlorine is a lot harsher. Link to comment Share on other sites More sharing options...
ericem Posted June 15, 2007 Author Share Posted June 15, 2007 thanks, ya thats what i thought. He thinks there to harsh he told me Well, ill get some non-chlor brake cleaner, on the front of the throttle body cleaner it said for o2 throttle body, and a few other engine components, i think PCV as well, but didn't say MAF. Link to comment Share on other sites More sharing options...
fnlyfnd Posted June 15, 2007 Share Posted June 15, 2007 There is actual MAF cleaner. Just use ngk cheap copper plugs, I didn't think platinums worked well with our engine. It has been discussed endlessly, a quick search would yield good info Link to comment Share on other sites More sharing options...
WJM Posted June 15, 2007 Share Posted June 15, 2007 Coppers yield the BEST PERFORMANCE when used properly...aka gapped and changed regularly. Plat. and iridium plugs are for longevity....60k miles, and 100k miles change intervals. However, when those are put to the test...they really do not perform as well as a good copper. I would use the stock copper plugs, and make sure that the coil and wires are in good condition. From there...check on your air filter, and make sure the O2 sensors are working properly and last but not least...see if the cats are not clogged and if the muffler is still intact internally. Link to comment Share on other sites More sharing options...
porcupine73 Posted June 15, 2007 Share Posted June 15, 2007 Dang I wish I'd of read that before spending on iridiums again...that might explain why my oldest '94 with the copper for some reason seems like a banshee compared to the '00.... Link to comment Share on other sites More sharing options...
ericem Posted June 15, 2007 Author Share Posted June 15, 2007 !! omg i spent a full $5 on 4 platnium plugs!!!!!! yes $5 Aw ill just leave it for now, tommorow ill get the brake cleaner, as i can not find the MAF cleaner ANYWHERE. Link to comment Share on other sites More sharing options...
164eman Posted June 15, 2007 Share Posted June 15, 2007 I stand by NGK BKR63-11's. They are reliable, inexpensive. Link to comment Share on other sites More sharing options...
2.5GL Posted June 15, 2007 Share Posted June 15, 2007 I would go for the part # 2756 NGK. I think it is the BKR6ES? I have seen them for $1.10-$2.50 each, depending on your source. And have seen them last 60-70 K with no misfire problems. Lewis Link to comment Share on other sites More sharing options...
RallyKeith Posted June 15, 2007 Share Posted June 15, 2007 I stand by NGK BKR63-11's. They are reliable, inexpensive. That's all I run, the BKR6 or BKR5 (5 is a slightly hotter heat range and better if you do short commutes or have an engine will blow by/ burns oil) Keith Link to comment Share on other sites More sharing options...
Finsol Posted June 15, 2007 Share Posted June 15, 2007 I have bosch Platinum +2's in there and don't seem to have any issues with the ignition system, runs very smooth. I'm a basic 'Bosch Super' copper person myself but I got these for free and figured hell I'll pop em in and give them a try, not disappointed. Link to comment Share on other sites More sharing options...
DerFahrer Posted June 16, 2007 Share Posted June 16, 2007 The advice WJM has given is the best advice that can be given. Copper is still a better conductor than platinum or iridium. Those plugs just last longer. Only use plat/iri plugs if that's what was used from the factory. Finsol, do your Subaru a favor and get those Bosch plugs out. Subarus and Bosch plugs are not BFFs. It may run okay, but you're hurting performance and worsening your gas mileage. Link to comment Share on other sites More sharing options...
WJM Posted June 16, 2007 Share Posted June 16, 2007 The bosch supers (copper) seem to work 'ok'...but I have had lots of problems with SUBARUs and the bosch plats. Link to comment Share on other sites More sharing options...
ericem Posted June 16, 2007 Author Share Posted June 16, 2007 tommorow going to auto parts store(napa) going to get a ground cable for thats anther thing.......... and the NGK plugs, if they even have themm,and if so if they are cheaper thhen the ones at subaru. Not to sure EXACTLY which plugs came with the car though! Link to comment Share on other sites More sharing options...
86BRATMAN Posted June 16, 2007 Share Posted June 16, 2007 Most parts store batabases have the oe plug type noted. At least they do where I buy plugs(advance auto). If you have an owners manual it should also be in there. Matter of fact I have one... NGK BKR6E-11 Link to comment Share on other sites More sharing options...
ericem Posted June 16, 2007 Author Share Posted June 16, 2007 Most parts store batabases have the oe plug type noted. At least they do where I buy plugs(advance auto). If you have an owners manual it should also be in there. Matter of fact I have one... NGK BKR6E-11 i wonder if the plugs are different between the turbo and non turbo? u have a 91 SS correct? Link to comment Share on other sites More sharing options...
ericem Posted June 16, 2007 Author Share Posted June 16, 2007 Ok went on NGK website says it used these under V-power BKR6E-11 then here is the rest it can use. G-Power Platinum Part No. Stock No. Plug Gap Note Full Tip BKR6EGP 7092 0.044 View View Iridium IX Part No. Stock No. Plug Gap Note Full Tip BKR6EIX-11 3764 0.044 View View Laser Platinum/Iridium Part No. Stock No. Plug Gap Note Full Tip BKR6EP-11 2978 0.044 View View Link to comment Share on other sites More sharing options...
86BRATMAN Posted June 16, 2007 Share Posted June 16, 2007 i wonder if the plugs are different between the turbo and non turbo? u have a 91 SS correct? That was taken from a 93 owners manual for the non turbo listed. Link to comment Share on other sites More sharing options...
86BRATMAN Posted June 16, 2007 Share Posted June 16, 2007 I would stick with the BKR6E-11's myself. I bought the uber expensive irridiums for the SS. But my other non turbo ej's have always gotten the standard plugs with ngk wires. Link to comment Share on other sites More sharing options...
fnlyfnd Posted June 16, 2007 Share Posted June 16, 2007 oem wires are the best Link to comment Share on other sites More sharing options...
ericem Posted June 16, 2007 Author Share Posted June 16, 2007 stupid throttle body cleaner :-p There now the car runs that way i like it. Its nice and quiet, and smooth, and no hesitation. Awsome! I used some electronic cleaner. Worked wonders, before i could feel a slight vibration from the engine at idle which was 500rpm and now i don't feel anything when i put my hand on the engine. I wonder if changing the plugs would make it a little better. If i find a deal on the v-power plugs i will go for them. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now