njdrsubaru Posted July 13, 2007 Share Posted July 13, 2007 hey guys my legacy has a exhaust problem... i need to replace the pipe gasket and flange between the cat and mid pipe.. does anyone have a part number for the gasket and flange? thanks in advance Neo Quote Link to comment Share on other sites More sharing options...
Reveeen Posted July 13, 2007 Share Posted July 13, 2007 As far as I know the flange is not serviced separately, your local generic auto parts store can hook you up with a generic flange (after you measure yours) and gasket (donut). At least that is what I had to do here (I replaced both flanges, so the "key" measurement was the pipe diameter), they do sell a two part flange that fits together, so you avoid a complete disassembly. Quote Link to comment Share on other sites More sharing options...
porcupine73 Posted July 13, 2007 Share Posted July 13, 2007 Hi. I might not be understanding exactly where your exhaust issue is, but I had a leak on my '00obw that these parts fixed: Quote Link to comment Share on other sites More sharing options...
Reveeen Posted July 13, 2007 Share Posted July 13, 2007 porcupine73 I *think* that is the idea, but the flanges rot off these cars as they get older, so to avoid cutting and welding, you would buy the two piece flange kit (two 1/2 flanges that join at the through bolts in an interlocking kind of way). What did Subaru charge you for the bolt/spring/nut combination? (After market kits, eg: Dodge 3.0, same set-up, are $5 for two sets) Quote Link to comment Share on other sites More sharing options...
njdrsubaru Posted July 13, 2007 Author Share Posted July 13, 2007 Hi. I might not be understanding exactly where your exhaust issue is, but I had a leak on my '00obw that these parts fixed: that is exactly what my problem is!!! so what are the part numbers i cant see them... :banana: thanks Quote Link to comment Share on other sites More sharing options...
porcupine73 Posted July 13, 2007 Share Posted July 13, 2007 The donut part # is below. I would highly suggest the new shoulder bolts too as mine were really rusted and broke during removal. Note of course this is for a 2000 2.5L Outback which might be different than yours. If you're ordering from a Subaru dealer I'd just order by description; that's what I did and got all the correct parts: Quote Link to comment Share on other sites More sharing options...
njdrsubaru Posted July 13, 2007 Author Share Posted July 13, 2007 The donut part # is below. I would highly suggest the new shoulder bolts too as mine were really rusted and broke during removal. Note of course this is for a 2000 2.5L Outback which might be different than yours. If you're ordering from a Subaru dealer I'd just order by description; that's what I did and got all the correct parts: great perfect and do you remember how much did you pay for the gasket? Quote Link to comment Share on other sites More sharing options...
porcupine73 Posted July 13, 2007 Share Posted July 13, 2007 mmmm...yes let's see I posted it in a thread some time back let me see if I can find it...yes this thread. let's see...total for exhaust parts $21.40: exhaust gasket $6.16; two flange bolts ttl $4.40; two nuts ttl $3.66; two springs ttl $7.18. I also got two cam cap o-rings $6.12 ttl and starter contact set $5.31. Add on $9.95 shipping (their minimum shipping charge or 10% of order) for total $42.78. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.