The Dude Abides Posted July 21, 2007 Share Posted July 21, 2007 Ok so Ive got the popping in the front when im turning so i know its coming. Someone said something here about gck shafts. Couple Questions Is it the complete axel end to end since ive got the axels out i might as well replace the wheel bearings right do they make the gck axels for the rear as well thanks again ben Link to comment Share on other sites More sharing options...
chef_tim Posted July 21, 2007 Share Posted July 21, 2007 Yes depends; How many miles? any slop, rust etc? If they're good I say don't mess with them and Yes. I just put a GCK in my OBW and it was a very beefy looking axle, I bought it from Auto Zone, $90.02. Later, Tim Link to comment Share on other sites More sharing options...
jonas Posted July 21, 2007 Share Posted July 21, 2007 i've got to order mine next week. only one currently is bad, but both are remans so i'm just gonna replace both and be done with it. you can look at/order online thru autozone but i don't know what shipping would be. Link to comment Share on other sites More sharing options...
csiprun Posted July 22, 2007 Share Posted July 22, 2007 Apparently, Autozone has been out of stock for these or the vendor has stopped supplying them. I just ordered one at this site: http://www.autopn.com/store/pc/viewPrd.asp?idproduct=8662 It doesn't say that the brand is CGK but the SKU matches so I think its the same axel. I'll let you know when I get it if it works out alright. Also, anyone live around the Wallingford/Seattle area that is knowledgeable in changing front axels and willing to give me a hand? Link to comment Share on other sites More sharing options...
snoutmeat Posted July 22, 2007 Share Posted July 22, 2007 What's the difference between GSP and GCK? Just (30 minutes ago) finished putting a new GSP shaft in my BRAT. Replaced 1 a few months ago (with a new axle from Autozone), then tried getting another a few weeks ago and they were only able to get me a Cardone remanufactured part. I ripped the end off the box I'd just brought in (they don't have a core charge, but they do recycle dead half-shafts), went home, did a Google search on the part number listed on the end of the box, and found the same part number at Rock Auto (http://www.rockauto.com). I can't figure out how to link directly to the page, but go to http://www.rockauto.com, put in your car (ie 1984 Subaru BRAT), choose "drivetrain", then "CV half shaft assembly". They're $50.79 before shipping, and $57 shipped to my Seattle address! I thought Autozone's $90 price was very fair...and yes, I've ordered and received one, and the box looks identical (from my memory) to the one I got from Autozone. I'm not sure if the first one was GSP or GCK...it was a 3-letter abbreviation starting with G.... Either way, the part number was NCV66005. It's new (not reman), comes with castle nut and roll pin, but no cotter pin. At $51, it's cheaper than any of the remanufactured ones. Unfortunately, that site doesn't sell rears (except for an $80 reman with a $50 core). Link to comment Share on other sites More sharing options...
jonas Posted July 22, 2007 Share Posted July 22, 2007 they must be NOS or such. i looked at the link provided and they don't mark them as remans. hmm, let us know how you like them. i've heard the GCK's are a redesigned, more heavy duty axle, so that may increase the cost. but anyway i've been paying 50 bucks each for remans that last maybe a year and i'm tired of it. i'll pay extra for quality..... Link to comment Share on other sites More sharing options...
snoutmeat Posted July 22, 2007 Share Posted July 22, 2007 I've had bad luck with remans as well; that's why I'm going with the new ones these days. I'll update later, but I'm guessing that these will last a lot longer than the remanufactured ones.... Link to comment Share on other sites More sharing options...
TheSubaruJunkie Posted July 22, 2007 Share Posted July 22, 2007 I would go with remans on the rear. Rear CV's last forever since there is no turning of the outside cup. However, the fronts go all the time. I have a set of GCK axles for my EA81 and i loved them. Ive gone through pairs and pairs of reman axles, these GCK's are brand new and not much more expensive. -Brian Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now