charm Posted July 29, 2007 Share Posted July 29, 2007 O.k., I know I've seen a VERY well written procedure on how to do a strut swap on here before but after an hour of searching, I figure somebody knows exactly where it is. I plan to start this little project around noon or 1 o'clock today and hope it won't take more then 4 or 6 hours. Please let me know where I saw that procedure?!!! Link to comment Share on other sites More sharing options...
tcspeer Posted July 29, 2007 Share Posted July 29, 2007 Three tips, be sure and mark the top flange bolt with a paint marker to the flange, this will keep your alinement, also mark the orination of the top hat to the spring, and remember the little hole in the top hat should be turned out towards the tire. O.k., I know I've seen a VERY well written procedure on how to do a strut swap on here before but after an hour of searching, I figure somebody knows exactly where it is. I plan to start this little project around noon or 1 o'clock today and hope it won't take more then 4 or 6 hours. Please let me know where I saw that procedure?!!! Link to comment Share on other sites More sharing options...
jamal Posted July 29, 2007 Share Posted July 29, 2007 the three tophat bolts only need 14 lb-ft and they're prone to breaking. Here's a good writeup that was recently posted on legacycentral: http://bbs.legacycentral.org/viewtopic.php?t=32233 Link to comment Share on other sites More sharing options...
Andyjo Posted July 30, 2007 Share Posted July 30, 2007 http://www.ultimatesubaru.org/forum/showthread.php?t=50268 ? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now