archemitis Posted December 4, 2003 Share Posted December 4, 2003 is it understood knowledge that brats have better cams than other ea81s? or is that another unprooved usmb myth? Link to comment Share on other sites More sharing options...
GeneralDisorder Posted December 4, 2003 Share Posted December 4, 2003 Apparently that's true. They are supposed to have more of a torque grind to them. CCR will put them in for you..... must be some difference I would think. GD Link to comment Share on other sites More sharing options...
GLCraig Posted December 5, 2003 Share Posted December 5, 2003 You know my 83 FSM only shows 2 cams one for subarus with manual transmission and another for subarus with automatic transmissions. Link to comment Share on other sites More sharing options...
Tom63050 Posted December 5, 2003 Share Posted December 5, 2003 Emily at CCR sez that Brat cams are biased toward torque, 2WD cams toward HP, and 4WD hatch and wagon cams are in the middle; probably the best all-around cam. Just depends on your intended usage. Link to comment Share on other sites More sharing options...
the sucker king Posted December 5, 2003 Share Posted December 5, 2003 chef tim has a ccr engine w/ a brat cam. get in touch with him and see what's the skinny. i asked him a while back, but it wasn't in the car yet. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted December 5, 2003 Share Posted December 5, 2003 Best bet is to take a Brat cam, and have it ground for torque, and deck the heads to match. Then you will have a torque monster. The 2WD cam would explain why my lifted wagon (formerly 2WD) has mucho cojones on the freeway - that and it's '82 4 speed. That thing fly's down the strip. GD Link to comment Share on other sites More sharing options...
Skip Posted December 5, 2003 Share Posted December 5, 2003 I downloaded the parts manual from the recent posting by Josh. It is only for 1982. It only lists one cam for all EA81s but Emily knows her stuffing so I would not doubt her. But I did find this little ditty on early EA81 valves, that I don't believe I've read here before. Sorry if it's a reprint Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now