msmithmmx Posted September 5, 2007 Share Posted September 5, 2007 A 2.2 Engine from a Manual 97 Impreza into a Automatic 98 Legacy OBW, will there be any issues that I need to be worried about? Link to comment Share on other sites More sharing options...
lmdew Posted September 5, 2007 Share Posted September 5, 2007 I don't think you will have the ERG valve which will throw a CEL. Also check to see if the y-pipe is the same, single or dual port heads. Link to comment Share on other sites More sharing options...
msmithmmx Posted September 9, 2007 Author Share Posted September 9, 2007 You were right I don't have any of the egr stuff. Can I just move a 2.5 manifold over with everything? There also seem to be a metal pipe from the egr back into the head, I can't see any hole on my 2.2 to retro fit the head? Link to comment Share on other sites More sharing options...
lmdew Posted September 10, 2007 Share Posted September 10, 2007 That's the problem, the block is not drilled or tapped for the pipe. If the computer does not see the EGR, you will always have a CEL. The 95 2.2 from an automatic trans is a direct drop in if you can find a good one. Link to comment Share on other sites More sharing options...
Legacy777 Posted September 10, 2007 Share Posted September 10, 2007 You could try putting in a resistor. I don't know if the ECU would be happy with that.....may be worth a try. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now