Can you see whats new ? on my Brat

[rguyver]

So if I was to send you EJ and XT6 backing plates, would you have a chance to do it again?:-p

 

Oh and I had my car apart in the back end and now I know how it all works. I was forgetting the XT6 rotor was screwed to the actual hub and was thinking the rotor WAS the hub and the lugs pressed into it:clap:

 

I could build sets for you if you sent just the EJ backing plates , thats all i need i made a drill jig to line up the new holes , but if you know a shop nearby that can cut you the rings you just need to weld them in and mark out the hloes .

 

if you still wanted me to build them it would be i gess 100$ + shipping , i would weld in the ring redrill the backing plate and repaint and send them back . not sure on the turn around time it would depend on when you got them to me it only accualy takes 3-4h build time .

[Caboobaroo]

I could build sets for you if you sent just the EJ backing plates , thats all i need i made a drill jig to line up the new holes , but if you know a shop nearby that can cut you the rings you just need to weld them in and mark out the hloes .

 

if you still wanted me to build them it would be i gess 100$ + shipping , i would weld in the ring redrill the backing plate and repaint and send them back . not sure on the turn around time it would depend on when you got them to me it only accualy takes 3-4h build time .

 

Sweet, I can do that. I'll see how much backing plates from the dealer are through my work but if they're too spendy, I'll get some from a junkyard. I'll see what I can come up with!