[HTi]Johnson Posted September 22, 2007 Share Posted September 22, 2007 I have a 1989 RX and I'm going to convert it to a manual. Is there anything I should know before, it has an automatic. I know about swapping the insides of the diff to a 3.9 setup, as I've done a conversion before, but not with a 4eat. Thanks. Link to comment Share on other sites More sharing options...
calebz Posted September 22, 2007 Share Posted September 22, 2007 Which manual are you putting in there? It would make the most sense to put the RX D/R (87+) in there. Link to comment Share on other sites More sharing options...
[HTi]Johnson Posted September 22, 2007 Author Share Posted September 22, 2007 The RX awd D/R is my goal, but, until I get one, I might just put my dual range in there and get another regular 3.9 diff. Link to comment Share on other sites More sharing options...
Caboobaroo Posted September 23, 2007 Share Posted September 23, 2007 4EAT is very heavy so having a couple extra people to help is a big plus. I removed one from my '89 RX by myself... With the 4EAT, I tried to jumper the neutral safety switch in the wiring harness from the tranny but it never worked so I wired in a pushbutton. Other then that, I can't think of anything else.... Link to comment Share on other sites More sharing options...
![[HTi]Johnson](https://www.ultimatesubaru.org/forum/uploads/profile/photo-thumb-2784.jpg)
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now