TheLoyale Posted September 26, 2007 Share Posted September 26, 2007 Now i've got a rust spot about the size of a Golf ball behind the Subaru word logo and i wanted to know, If i slowly and smothly pull the logo off will the black background come off of the word? And what would i use to put it back on? Because i want to fix that spot before it gets worse.. Thanx Link to comment Share on other sites More sharing options...
daeron Posted September 26, 2007 Share Posted September 26, 2007 Now i've got a rust spot about the size of a Golf ball behind the Subaru word logo and i wanted to know, If i slowly and smothly pull the logo off will the black background come off of the word? And what would i use to put it back on? Because i want to fix that spot before it gets worse.. Thanx all you gotta do is paint it. Any color you want, if you get all the black off. I have the Subaru GL-10 plastic emblem off my original trunklid still, and its all buggered up.. I am going to re line the lettering with testor's silver model paint and then hit the back with some plastic black paint, and it should come out fine from what i have read from others who have already done it. Link to comment Share on other sites More sharing options...
TheLoyale Posted September 26, 2007 Author Share Posted September 26, 2007 Humm ok, What kind of glue should i use to put it back on? Some clear windsheild glue? Link to comment Share on other sites More sharing options...
Bucky92 Posted September 26, 2007 Share Posted September 26, 2007 I would use an epoxy over glue..will give you a stronger bond and holds better when exposed to heat or cold Link to comment Share on other sites More sharing options...
TheLoyale Posted September 26, 2007 Author Share Posted September 26, 2007 Okay, What exaticly is an epoxy? Like i kinda know what it is but not sure. Can i get that at a Wal-mart or Ace? Link to comment Share on other sites More sharing options...
Bucky92 Posted September 26, 2007 Share Posted September 26, 2007 Okay, What exaticly is an epoxy? Like i kinda know what it is but not sure. Can i get that at a Wal-mart or Ace? Yup you can get it at wally world or Ace...or even the auto parts store...its in a tube...well kinda like 2 tubes held together...had a plunger ( think of it as a big needle) ..what it does is it mixes equal amounts of the 2 items together ..the 2 "chemicals" have a reaction that makes them very sticky and hardens very hard.. There are different types..5 minute hold ..30 minute etc etc..Its definately stronger then glue...I used epoxy to fix a loose piece of trim on Rocky and still holding super strong Link to comment Share on other sites More sharing options...
TheLoyale Posted September 26, 2007 Author Share Posted September 26, 2007 Alright i'll get the strongest stuff i can find! Thanx! PS: Did you recive my PM? Just making sure it still works. Later.. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now