gohawks Posted September 27, 2007 Share Posted September 27, 2007 Lately I have been noticing the door ajar warning light on the dash being lit. It goes out if I slightly tug on the driver side door, however it re-illuminates if I let go of the door. The issue is not with the plunger/sitch located on the jamb. If I apply gentle pressure with my finger the warning light goes off. So I guess the door is not lined up exactly right. Sometimes slamming it will shut off the light, sometimes not. Any clues, hints on lining up the door right? I know you can really screw it up if you're not careful. Thanks. 1995 Subaru Legacy Wagon L series Link to comment Share on other sites More sharing options...
Suzam Posted September 27, 2007 Share Posted September 27, 2007 If the door appears to be aligned and you don't have any problems shutting it, or wind noise, I'd hot glue a piece of thin plastic (or maybe just a thick drop if glue) on the door opposite the switch for a better push in of the plunger. Link to comment Share on other sites More sharing options...
idosubaru Posted September 27, 2007 Share Posted September 27, 2007 has the door ever been replaced, worked on or that area painted? i'd have another look at the plunger as well. when you press the plunger with your finger, does it work the same way every single time without a hitch? if it works fine every single time then see if the plunger is sticking, not coming fully out (pull my finger type of test), or maybe rubbed/broken off. or remove the screw and make sure the metal isn't all rusty (highly doubtful). if it's a bit senile, check the electrical connector that pulls out with the switch. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now