Numbchux Posted October 6, 2007 Share Posted October 6, 2007 PoorMansImpreza requested I take these measurements for him....and I thought I'd make them public for anyone who wants to make their own brackets. all 5 holes are exactly 10 mm across. to ensure accuracy, I always measured (with a caliper) from the closest edges of the holes. so in order to place the center correctly, add 5mm to reach the center of the hole. also, the 2 caliper bracket mounts are both 42mm from the center hole and 85mm apart (measured the same way). Link to comment Share on other sites More sharing options...
Recommended Posts