Geck512 Posted December 11, 2003 Share Posted December 11, 2003 I have a 1986 GL-10 Turbo four door push button 4wdr that doesnt work. (probably the electronics as they stink on this rig) It always smoked. A little at startup maybe a little from the part of the exhaust where it joins into the single pipe the stove I think its called. Well I park after a long trip. It smokes I check it out. Its a little thicker than usual but nothing to be concerned about right... :cough: Well... I spend an hour in the library hop back it let it coast down the hill and turn it over (bad starter you see) and moments later I find I am driving a Jet! Trail of smoke and all. I make it the four or five blocks back home from my trip and park it I am really smoking! From the tail pipe and gobs from under the hood. I shut it down and get under the hood. Cant see a thing I am a bit of an idiot when it comes to doing things under there. So I go for the dipstick. I am parked on a slight down hill so I can get it going again next time and the stick reads Nothing. Nothing boys and girls. Ladies and gents I was just driving a car with no oil. Now my temp gauge isnt the most accurate thing on the car but it never read hot. My radiator never had a problem. I was running my heater and it never got overly hot. What did I do? Every time I start the thing its a smoke storm. I tried to put more oil in and put in WAY to much. So I am going to drain it and fill it proper tomorrow morning. I am going to check the pcv I read that can sometimes cause a bucket of smoke. The engine sounded fine. It still had power. It just smokes so much I am sure someone is going to careen off the road behind me or I am going to burst into flames. Oh please help I simpley cant afford another car. Well maybe that 82 soobie down the street. new tires, needs a Starter module? (thats what the owner said) I think he means an(Ignition controller module) but what do I know!? I know he only wants two hundred for it. :cough: I paid three for the one thats smoking and I am not ready to let her die! Please all suggestions welcome! Joshua:eh: Link to comment Share on other sites More sharing options...
calebz Posted December 11, 2003 Share Posted December 11, 2003 What color is the smoke?. That will be a good indicator of its origin Link to comment Share on other sites More sharing options...
Ma-fia Posted December 11, 2003 Share Posted December 11, 2003 Joshua, try to change the title of your post: in a few words describe what's happening and include vehicle year and model. This way (hopefully) more people might be motivated to view your post and help if they know anything about it. Right now your title doesn't tell much. Other than that -- I feel for you (have been in your situation), but - I often cry for help myself when it comes to "why's". Link to comment Share on other sites More sharing options...
baccaruda Posted December 11, 2003 Share Posted December 11, 2003 i vote for a completely shot pcv valve.. it's the cheapest and easiest possible fix. get one from the dealer. after you add oil Link to comment Share on other sites More sharing options...
GeneralDisorder Posted December 11, 2003 Share Posted December 11, 2003 No oil on the dispstick is nothing to worry about - after about 1.5 quarts they don't register any more, but likely there is a few quarts left, and as long as you didn't lose oil pressure, and it was running fine, then you probably didn't do any major damage. GD Link to comment Share on other sites More sharing options...
soobme Posted December 11, 2003 Share Posted December 11, 2003 Ifin' it's smokin' from under de bonnit 2 then it could be a cracked/bad turbo:eek: Mine has the same problem if I let the down pipe sit on a rock or stump for more than a second or 2, but it will go away after drivin' it around for 15-20min. I would still try the PVC 1st, cheep and eazy. Link to comment Share on other sites More sharing options...
Geck512 Posted December 12, 2003 Author Share Posted December 12, 2003 Smokes white grey looks like steam but smells rank. I cant get the hose off the pcv and I cant get the pcv off ::LAUGH:: I only have one wrench. The kind that opens and closes like a lever. I am going to borrow some crescent wrenches? The closed ended/open ended sort. GOSH I pray its the PCV. Thanks Folks I will keep you informed. PS Preciate the tip on the title. No more mellodrama until i get to message! HA Link to comment Share on other sites More sharing options...
Turbone Posted December 12, 2003 Share Posted December 12, 2003 It also sounds like the turbo blew the oil seal, or line. This turbo is easy to find and shouldnt cost much second hand. The problem for you I think, is lack of tools and know-how. But seeing how your in the most Soob populated area around, maybe someone can give you a hand replacing it. (sorry, I cant help, I already have enough on my plate) Rob Link to comment Share on other sites More sharing options...
Skip Posted December 12, 2003 Share Posted December 12, 2003 Sorry guys. This is a 3 speed automatic -correct? My check mark goes beside the vacuum modulator on the tranny. Check the auto tranny fluid, if it's a bad mod. it will be real low. BTW I am the optomist of the group. You only need one wrench to change it to. This devise is on the pass side of the transmission, down low. Has one rubber hose on it. If you pull the rubber hose and it has red oil in it - that is the problem. Sure hope this helps. Link to comment Share on other sites More sharing options...
Geck512 Posted December 14, 2003 Author Share Posted December 14, 2003 Its a manual. Do we know anyone who might be in the mood to offer a helping hand in the Gorge area? White Salmon/Hood River? Thanks Joshua:slobber: Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now