crazylong127 Posted October 29, 2007 Share Posted October 29, 2007 i need to replace my muffler and i was wondering if the pipe size was 1.75 or 2 inches. it is on an 87 1.8L carbed station wagon 4wd. Quote Link to comment Share on other sites More sharing options...
mudduck Posted October 29, 2007 Share Posted October 29, 2007 i need to replace my muffler and i was wondering if the pipe size was 1.75 or 2 inches. it is on an 87 1.8L carbed station wagon 4wd. I beleve it is 1.75" but I'm not positive. Quote Link to comment Share on other sites More sharing options...
ivantruckman Posted October 29, 2007 Share Posted October 29, 2007 i always get a generic 2 " muffler and buy the adapter for it. they cost 19.95 at autoworks, if you can weld just cut off the old donut mounts and tack them on, works just marvelous i must say Quote Link to comment Share on other sites More sharing options...
crazylong127 Posted October 29, 2007 Author Share Posted October 29, 2007 i always get a generic 2 " muffler and buy the adapter for it. they cost 19.95 at autoworks, if you can weld just cut off the old donut mounts and tack them on, works just marvelous i must say so it is 1.75? Quote Link to comment Share on other sites More sharing options...
mudduck Posted October 30, 2007 Share Posted October 30, 2007 I'm thinking that i might just run straight pipe out the back of my wagon. Loud pipes save lives. Quote Link to comment Share on other sites More sharing options...
MilesFox Posted October 30, 2007 Share Posted October 30, 2007 1-7/8" but 1-3/4" will work as well (if the first is not available Quote Link to comment Share on other sites More sharing options...
daeron Posted October 30, 2007 Share Posted October 30, 2007 I'm thinking that i might just run straight pipe out the back of my wagon. Loud pipes save lives. you lousy red neck :-p (sarcasm) Quote Link to comment Share on other sites More sharing options...
mudduck Posted October 30, 2007 Share Posted October 30, 2007 you lousy red neck :-p (sarcasm) Dang right my necks red!! Now hold my beer and watch this! Quote Link to comment Share on other sites More sharing options...
Uberoo Posted October 30, 2007 Share Posted October 30, 2007 gee,I was going to suggest just running a straight pipe...I guess Im just a redneck then:headbang: .You could run a glasspack.a glasspack does kill some noise. Quote Link to comment Share on other sites More sharing options...
mudduck Posted October 30, 2007 Share Posted October 30, 2007 I'm really starting to think that some stacks comming off the manifold and right up out the hood might be the ticket! Quote Link to comment Share on other sites More sharing options...
hatchsub Posted October 31, 2007 Share Posted October 31, 2007 I'm really starting to think that some stacks comming off the manifold and right up out the hood might be the ticket! The quick easy way to tell when you have blowby Quote Link to comment Share on other sites More sharing options...
The Dude Abides Posted October 31, 2007 Share Posted October 31, 2007 that is hilarious hold my beer watch this those 2 phrases usually coenside with eachother. Ben Quote Link to comment Share on other sites More sharing options...
ivantruckman Posted October 31, 2007 Share Posted October 31, 2007 I'm really starting to think that some stacks comming off the manifold and right up out the hood might be the ticket! sweet i was thinking of that too, but i cant figure out how to get them from under the engine and around the engine, that would look awsome, the cops pull me over once a month just for the camo paint, id get it once a week with thoes puppys sticking outa the hood:headbang: Quote Link to comment Share on other sites More sharing options...
mudduck Posted October 31, 2007 Share Posted October 31, 2007 I was thinking, instead of running them out my hood, I could just run them out the front fenders, rust has already made some openings. Quote Link to comment Share on other sites More sharing options...
The Dude Abides Posted October 31, 2007 Share Posted October 31, 2007 wouldnt you eliminate all backpressure if you just ran strait pipes through your hood. Ben Quote Link to comment Share on other sites More sharing options...
hatchsub Posted October 31, 2007 Share Posted October 31, 2007 wouldnt you eliminate all backpressure if you just ran strait pipes through your hood. Ben Yes. Engine would run like crap Quote Link to comment Share on other sites More sharing options...
monstaru Posted November 1, 2007 Share Posted November 1, 2007 backpressure is a little ...lets say....non issue.you just have to tune it properly. Quote Link to comment Share on other sites More sharing options...
dragonfire Posted November 1, 2007 Share Posted November 1, 2007 that is hilarious hold my beer watch this those 2 phrases usually coenside with eachother. Ben yeah and most of the time it ends in a ride in a police car or an ambulance:lol: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.