legacyak Posted November 18, 2007 Share Posted November 18, 2007 Looking at putting a new clutch in when getting the HG's done in my 2000 OBW. Is this a decent clutch? Any input and advice would be great! I don't need to know if it's the absolute best clutch out there, but I want to know if it's a good value for the price. Thanks! http://cgi.ebay.com/ebaymotors/SUBARU-IMPREZA-FORESTER-LEGACY-OUTBACK-CLUTCH-KIT_W0QQcmdZViewItemQQcategoryZ33730QQihZ009QQitemZ190174926311QQtcZphoto Link to comment Share on other sites More sharing options...
ninjaben43 Posted November 18, 2007 Share Posted November 18, 2007 looks good to me:headbang: Link to comment Share on other sites More sharing options...
wondercow2 Posted November 18, 2007 Share Posted November 18, 2007 I used the same kit in my Legacy. No complaints, although even with a nice machined flywheel, I still have clutch chatter/shuddering to deal with. Link to comment Share on other sites More sharing options...
davebugs Posted November 20, 2007 Share Posted November 20, 2007 I've installed these in VW's, Honda's, Toyota's, Saturns, and today one is going into a 97 OB. I've never had an issue with them in the other cars. I don't expect to have an issue with the Sub. FYI I buy a kit called Rhino Pak (I'll have to check that spelling) that is a flywheel, clutch plate, TO bearing, pilot bearing, etc. For usual jap stuff and Saturns they cost me around 100 bucks, for a Sub closer to 250. Why are the Sub's so special? Dave Link to comment Share on other sites More sharing options...
sea#3 Posted November 20, 2007 Share Posted November 20, 2007 The Valeo clutch was OEM on your car . But just like wondercow2 says they tend to chatter when cold and some time always . Subaru went to an EXEDY/DAKIN clutch to get away from the chatter problem , to answer your question is it a good price ..Yup <br> SEA#3 Link to comment Share on other sites More sharing options...
beataru Posted November 20, 2007 Share Posted November 20, 2007 The Clutch Kit looks fine to me, NTN is a good bearing manufacturer. I doubt youll beat the price. Well, maybe. Go to town! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now