jmd235 Posted November 19, 2007 Share Posted November 19, 2007 I am currently manufacturing 5 lug conversion kits to fit liberty/legacy or WRX brakes onto MY/Brumby[ea81] and L Series [ea82] and vortex subarus. These kits are engineer tested in Australia. In Australia the front lower control arm and rear backing plate are sold on an exchange basis but due to freight costs if anyone in America wanted to purchase a kit I would sell them the control arms and backing plates outright. The kit price is $1200 AUD plus freight [including control arm and backing plate] Please check out my website or contact me for further information. http://www.crossbredperformance.com Picture: Link to comment Share on other sites More sharing options...
The Keith Posted December 14, 2007 Share Posted December 14, 2007 Dear Santa, .... Link to comment Share on other sites More sharing options...
subyrally Posted December 14, 2007 Share Posted December 14, 2007 ea8? wet dream? Link to comment Share on other sites More sharing options...
Hodaka Rider Posted December 14, 2007 Share Posted December 14, 2007 Dear Santa, .... .... please make people understand why I want $1200 brakes on my $1800 car. Seriously, though - nice setup. Link to comment Share on other sites More sharing options...
Subarutex Posted December 14, 2007 Share Posted December 14, 2007 I think this is a great kit. I only wish I could afford it. I have priced frieght with him in the past, and his prices seem very reasonable. Link to comment Share on other sites More sharing options...
jmd235 Posted December 15, 2007 Author Share Posted December 15, 2007 Thanks for that Subarutex. I guess i am negotiable to a certain extent because freight is a killer and i would like to sell more kits in America so if anyone can suggest a cheaper way to freight i would be happy to look at it Jeff Crossbred Performance Link to comment Share on other sites More sharing options...
The Keith Posted December 15, 2007 Share Posted December 15, 2007 do you have front wheel kits as well? Link to comment Share on other sites More sharing options...
jmd235 Posted December 15, 2007 Author Share Posted December 15, 2007 The kits are complete and adapt front and rear Liberty or Wrx brakes to your ea81/brat/brumby or ea82/Xt /vortex subaru I hope this helps Link to comment Share on other sites More sharing options...
mellow65 Posted March 4, 2008 Share Posted March 4, 2008 The kits are complete and adapt front and rear Liberty or Wrx brakes to your ea81/brat/brumby or ea82/Xt /vortex subaruI hope this helps so with your kit we wouldn't need anything else but rotors and calipers from what ever we decide to take brakes from? oh man that's spendy but i think for what you are getting that might be worth it. Link to comment Share on other sites More sharing options...
jmd235 Posted March 21, 2008 Author Share Posted March 21, 2008 Our kits adapt your legacy/impreza brakes to either ea81/ea82 cars. So for the front you need to supply the front brakes including caliper , rotor , hub and strut from a donor legacy/impreza and i supply a modified control arm [exchange]so you can fit this to your car , i also supply a strut top adaptor [ea81] so you can use the ea81 strut top on your legacy/ impreza strut. For the rear you supply the rear backing plate ,rotor,caliper and handbrake assembly including cables from a donor legacy /impreza and i supply the custom hubs,custom backing plate adaptor , exchange modified backing plates so you can simply bolt your legacy brakes to your ea81/2 swingarms. I also supply custom rear brake hoses and mounting brackets, plus every other nut and bolt and washer required to make it a simple bolt on job. I also supply plugs to plug the extra 2 holes in your legacy/impreza master cylinder so it is a straight bolt on. I hope this helps and if you have any further questions please ask Link to comment Share on other sites More sharing options...
88HatchMonster Posted March 21, 2008 Share Posted March 21, 2008 That's about 1,082.35 USD + freight. A fair price for what looks like an amazing product. I'm definitely in the market and willing to pay, but I am uneasy sending that much money overseas to an individual. How do you guarantee that my money will equal my receipt of this kit? Also what is the timeframe all tolled including my sending you the parts you need and you shipping the completed kit? -Ryan Link to comment Share on other sites More sharing options...
Caboobaroo Posted March 21, 2008 Share Posted March 21, 2008 I have a complete 5-lug conversion on my car right now but I am looking to get the rear backing plates for the EJ rear disc brakes and ebrake setup. What would you charge for just those along with a set of rear hubs? I wonder if we can get someone in the states to get 5 sets or so and sell them for about the same price after shipping as from you? Just a thought... Link to comment Share on other sites More sharing options...
jmd235 Posted March 21, 2008 Author Share Posted March 21, 2008 I wonder if we can get someone in the states to get 5 sets or so and sell them for about the same price after shipping as from you? Just a thought... This is already being negotiated. To answer your first question hopefully the kits will be available for purchase in America soon Link to comment Share on other sites More sharing options...
dragonfire Posted April 30, 2008 Share Posted April 30, 2008 if these get sent to the states to be sold i may have to convert over. Link to comment Share on other sites More sharing options...
coylethebarbarian Posted May 10, 2008 Share Posted May 10, 2008 NICE! How soon before they are for sale in the states? did any of the board members ever go together on a package deal to help with shipping? Link to comment Share on other sites More sharing options...
jmd235 Posted May 11, 2008 Author Share Posted May 11, 2008 I am trying to sort out a freight deal at the moment and will keep you posted Link to comment Share on other sites More sharing options...
Yo'J Posted May 24, 2008 Share Posted May 24, 2008 Dear Santa, .... Dear God.... Link to comment Share on other sites More sharing options...
ShawnW Posted May 24, 2009 Share Posted May 24, 2009 So how many would be interested in the kit? I am working on setting up the first order and would like to know who would ACTUALLY buy one. The whole kit not just parts of it, and then those that would buy just the rear or just the front. Remember doing just the front means you will have difficulty in having an emergency brake which I am pretty sure is illegal to put a car on the road in the US without and just plain dangerous if it is legal. The price might seem high but by the time you buy Peugeot wheels, lugnuts or lugnut adapters you have spent some cash and have a rare and not always attractive wheel and tire combo. This opens up the wheel options and improves the brakes a great deal. If you bend a Peugeot wheel how many spares are available compared to a factory 5 bolt Subaru alloy/steelie? And are you going to be able to buy anything bigger than a 15" Peugeot? I love how these cars look with 16" WRX wheels...which are very cheap on craigslist at times. Link to comment Share on other sites More sharing options...
hyperlite2 Posted June 2, 2009 Share Posted June 2, 2009 theres a good chance that would be interested. will it work on an ea 81 brat (1982) Link to comment Share on other sites More sharing options...
Pooparu Posted June 3, 2009 Share Posted June 3, 2009 (edited) theres a good chance that would be interested. will it work on an ea 81 brat (1982) I think that's why the guy started making the kit. It was for his Gen 2 BRAT. In fact I think I saw a photo of a Gen 2 BRAT on the 5-Lug page used as an example. So I'm pretty sure the kit will work for your BRAT. Edited June 3, 2009 by Pooparu Link to comment Share on other sites More sharing options...
skiahfrazier Posted August 22, 2018 Share Posted August 22, 2018 Tried to find this online, no contact info? Link to comment Share on other sites More sharing options...
carfreak85 Posted August 23, 2018 Share Posted August 23, 2018 Woof, old thread! I'm pretty sure Crossbred are out of business. Link to comment Share on other sites More sharing options...
dfoyl Posted August 25, 2018 Share Posted August 25, 2018 Yes, Jeff packed it in a while ago. It was a well-engineered kit, except the hubs were a hybrid EJ design instead of XT6 and didn't have the hub-centric support. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now