testy Posted November 20, 2007 Share Posted November 20, 2007 On my 87 XT Turbo I need to do the clutch. From the store a EA82 Clutch is 150. But the EA82T clutch is 300. Is there any difference. Just a cheap clutch made by Dynapak but I only need to get 10000-20000 kms out of it. Part numbers.. EA82T - NU31144 EA82 - NU31019 Car is Turbo, 5mt, 4x4. Thanks alot guys. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted November 21, 2007 Share Posted November 21, 2007 EA82T is the *same* clutch as a 4WD EA82 N/A, but the clamping force of the pressure plate is higher. A regular 4WD clutch will fit, but won't grab like the turbo clutch will. GD Link to comment Share on other sites More sharing options...
testy Posted November 21, 2007 Author Share Posted November 21, 2007 Was just told on subaruxt.com that it wont work. Different hub spline count, imput shaft spines different, is this true. Doesnt make sense to me! Link to comment Share on other sites More sharing options...
GeneralDisorder Posted November 21, 2007 Share Posted November 21, 2007 The turbo trannies use a 25 spline stub axle, but I think the input shaft splines should be the same. A lot of folks here use the XT6 clutch with their EA82T's, and with lifted rigs running the N/A dual range tranny. There's not been any talk of swapping around the disc's with them so it seems they should be the same. GD Link to comment Share on other sites More sharing options...
Gloyale Posted November 22, 2007 Share Posted November 22, 2007 Was just told on subaruxt.com that it wont work. Different hub spline count, imput shaft spines different, is this true. Doesnt make sense to me! Only true for 2wds. Any 4wd EA82 clutch set will work. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now