Jump to content
Ultimate Subaru Message Board

Recommended Posts

Just read an article about oil experiments in a subaru GTT (which is the dutch legacy station with a turbo. Article is in Dutch though

http://www.extreme-machines.nl/downloads/Olierapport.doc

 

Iron Copp Lead Alum Sil Chr Tin Sod Pot

Gemiddelde 0W-40 0,0026 0,0019 0,0013 0,0012 0,0027 0,0003 0,0003 0,0009 0,0003

Gemiddelde 10W-40 0,0015 0,0024 0,0007 0,0006 0,0011 0,0002 0,0002 0,0009 0,0002

gemiddelde 5W-50 0,0013 0,0015 0,0006 0,0004 0,0009 0,0001 0,0002 0,0004 0,0015

Gemiddelde totaal 0,0025 0,0026 0,0015 0,0014 0,0024 0,0002 0,0004 0,0015 0,0004

 

(gemiddelde = average)

This table shows the contents of metals in the oil after driving equal distance of 10k km (not testing 1 batch) This shows that on average the 5w50 has the least wear if metals in oil do indicate engine wear.

 

Does anybody here tried this viscosity, cause seems to be a very nice all year around oil.

Link to comment
Share on other sites

The wear numbers do look excellent, but I don't like how the Mobil and Kendall sheared down to a 30 weight oil.

 

There's nothing about an oil that pumps well at low temperatures (5W) that would keep it from sweeping out contaminants. That's nonsense.

 

- Scott

Link to comment
Share on other sites

5W is too light an oil for the old junk I drive.

 

(wondering that maybe 5W is not heavy enough to wash metals out)

it only acts like a 5-weight when it's not warmed up, to ease start-up. once you're up to operating temperature, it behaves like a 50-weight, which is plenty thick for just about any street car, even too thick for many.

~Erik~

Link to comment
Share on other sites

Have run 20W50 but not 5W50. The problem with trying to compare various viscosity oils even of the same brand is that the additive (antiwear, etc) packs/quantities might be different. Higher viscosity oils naturally have a higher HT/HS high temp/high shear which can give better wear values.

 

I think some people specifically looking for 5W50 run Agip. Shell helix ultra might also have something in that vis range. I'm always wondering if hi vis spread oils use a lot of viscosity index improvers VII's to make it happen.

 

I pasted the values in excel so it would be tabular for easier viewing. I assume these are ppm:

gemiddelde.gif

Link to comment
Share on other sites

5W40 and 5W50 oils, for the most part, use Group III/IV basestocks, so they need some, but not a lot of VIIs. The Castrol 5W50 is more like a "strong" 5W40, just 0.1 cSt over the line. Kind of a poseur, lol.

 

I think those wear numbers are in percentages. PPM would be somethng like 26 for Iron, 19 for Copper, etc.

Link to comment
Share on other sites

I plan to continue using Shell Rotella 5-40 in my WRX in summer and 5-30 in winter. Both synthetic.

 

So far, I stick with 5-30 in the wifes 3.0 OBW. I would probably switch to 5-40 if it began using oil from wear, but it is still young in mileage.

 

this of course is in Texas.

 

interesting to see the 5-50 development. Could be helpful for some folks I suspect.

 

 

Carl

Link to comment
Share on other sites

Sure, but even Mobil's own 5W-40 is better suited for freezing weather. It's thinner in the cold than 5W-50.

 

I always like to remind that the xW-xx is just a consumer label that covers a range of viscosity. To be serious about oil choices, you must look at the tech. data sheets.

 

European Shell Ultra 5W-40, for example is so thin that it is almost a 5W-30 oil. Mobil Delvac 1 5W-40 is close to being a 5W-50 ...

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...