gohawks Posted November 30, 2007 Share Posted November 30, 2007 Anyone have a picture of the pvc location on a 1995 legacy? How hard is it to change? OEM all the way on this part? Thanks. Link to comment Share on other sites More sharing options...
porcupine73 Posted November 30, 2007 Share Posted November 30, 2007 Hi. Here's a pic from my '96 legacy 2.2L. It is easy to change, I think the wrench size is 22mm or 7/8" works too. It threads into the intake manifold; it doesn't 'pop' in like it does on some other makes. OEM part is about $7. I have had trouble with aftermarket pcv valves on fords so I stick with OEM. Link to comment Share on other sites More sharing options...
gohawks Posted November 30, 2007 Author Share Posted November 30, 2007 very nice, doesn't look too tough. Thanks for the help!!! Link to comment Share on other sites More sharing options...
Mark-O-Back Posted December 1, 2007 Share Posted December 1, 2007 Be sure to check the hose that attaches to it. It can get clogged with stuff too. Mine was down to a pin-hole at the PCV end. Link to comment Share on other sites More sharing options...
Towel Rail Posted December 1, 2007 Share Posted December 1, 2007 Even though my car isn't running rough or burning oil, I may go ahead and replace mine just for the heck of it. Thanks for the pics, porcupine -- saved me from having to search for part #s or ask questions! - Scott Link to comment Share on other sites More sharing options...
95LEGOBW Posted May 13, 2008 Share Posted May 13, 2008 Thanks for this pic, Porcupine. Saved me some time. Nicely done. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now