Jump to content
Ultimate Subaru Message Board

ea dash question


nw_david
 Share

Recommended Posts

"can" is relative.

 

Physically, yes.

 

Electrically is a different matter. It's been made to work - there's maybe a handful of people (myself included) that have ever succesfully done it (that I've heard about on this board and other's).

 

The plugs are different, as are the pin-outs. Some stuff like the trip-computer simply cannot be made to work with an analog cluster.

 

Basically you need the schematics for BOTH cars. All of them. Lots of circuits run through the cluster for warning lights, etc.

 

And the fuel guage sending unit has to be swapped as the resistance values are different between the two.

 

GD

Link to comment
Share on other sites

Some stuff like the trip-computer simply cannot be made to work with an analog cluster.

 

GD

 

I agree with everything except this, I have a trip computer in my non-digi dash XT and only the "range" button doesn't work (as you said, fuel sender is incorrect) it was just a matter of figuring out where 5 wires went and with the FSM that's not hard at all

Link to comment
Share on other sites

I agree with everything except this, I have a trip computer in my non-digi dash XT and only the "range" button doesn't work (as you said, fuel sender is incorrect) it was just a matter of figuring out where 5 wires went and with the FSM that's not hard at all

 

Ok - perhaps partially working then. But only on the EA82's. The EA81's trip computer is built into the cluster so it can't be made to work.

 

GD

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...