legacyak Posted January 5, 2008 Share Posted January 5, 2008 I'm going to tackle the front oxygen sensor tommorow. I have a 22 mm wrench and a can of PB blast. Is that all i need? Quote Link to comment Share on other sites More sharing options...
keltik Posted January 5, 2008 Share Posted January 5, 2008 Youll need a couple cans of Steinlager to loosen up first then earmuffs for any children in the vicinity. Unless i just got unlucky and every O2 sensor ive changed was welded in place by the previous owner. Quote Link to comment Share on other sites More sharing options...
nipper Posted January 5, 2008 Share Posted January 5, 2008 Youll need a couple cans of Steinlager to loosen up first then earmuffs for any children in the vicinity. Much easier to leanr how to curse in latin nipper Quote Link to comment Share on other sites More sharing options...
fnlyfnd Posted January 5, 2008 Share Posted January 5, 2008 I got mine out pretty easy. I started the car for a minute or two before hand. Enough to warm it up but not to hot. I used a hammer to smack the wrench which worked brilliantly! Quote Link to comment Share on other sites More sharing options...
porcupine73 Posted January 6, 2008 Share Posted January 6, 2008 Yes warming the exhaust for a couple minutes has always been the thing that got them to finally break loose after a good Kroiling. Quote Link to comment Share on other sites More sharing options...
brus brother Posted January 6, 2008 Share Posted January 6, 2008 Much easier to leanr how to curse in latin nipper Deus ex machina? Quote Link to comment Share on other sites More sharing options...
nipper Posted January 7, 2008 Share Posted January 7, 2008 Somehow in latin it just doesnt sound as bad http://en.wikipedia.org/wiki/Latin_profanity nipper Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.