cd45 Posted January 18, 2008 Share Posted January 18, 2008 I pulled the oil pump off of the Brat tonight. The back plate between the pump and the block cracked at the bottom. Where do I get another one? I have not called the local parts houses yet. I started here first. Thanks. Link to comment Share on other sites More sharing options...
woundedbrat Posted January 18, 2008 Share Posted January 18, 2008 do you mean gasket? Link to comment Share on other sites More sharing options...
cd45 Posted January 18, 2008 Author Share Posted January 18, 2008 No, I mean the aluminum plate between the block and the pump housing. I will post pics this weekend. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted January 18, 2008 Share Posted January 18, 2008 It's part of the pump - you have to buy the whole thing. The plate is not availible seperately. Next time don't pry so hard - twist and pull gently. Use the filter as a handle. Tap gently to get it started twisting. The good news is that the pump's generally require replacement around every 100k miles or so. The EA81's definately benefit from a new pump. The EA82's and up don't need replacement as often it seems like. 20+ psi pressure at hot idle is what you want. GD Link to comment Share on other sites More sharing options...
cd45 Posted January 18, 2008 Author Share Posted January 18, 2008 Pressure was good, about 70psi while driving, 30-40 at idle. I only removed it to change the seals, they were really leaking. It had siezed to the block pretty good, and when it started to come loose, only one side started. Thanks guys. Link to comment Share on other sites More sharing options...
edrach Posted January 18, 2008 Share Posted January 18, 2008 Try Jason in Parts at Mike Scarf Subaru. If it's still available he can get it. Toll free: 1-866-528-5282. Link to comment Share on other sites More sharing options...
Gloyale Posted January 18, 2008 Share Posted January 18, 2008 Pressure was good, about 70psi while driving, 30-40 at idle. I only removed it to change the seals, they were really leaking. It had siezed to the block pretty good, and when it started to come loose, only one side started. Thanks guys. Are you sure you didn't forget the 5th bolt off to the side? oops, EA81 Link to comment Share on other sites More sharing options...
cd45 Posted January 19, 2008 Author Share Posted January 19, 2008 OK, I took the pump apart today to clean it up. I found out that it was broken before I started messing with it. I just finished the job. I will have to order one. This really sucks, I wanted to start driving it. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now