daeron Posted January 18, 2008 Share Posted January 18, 2008 I wanted to post this in the older gen, and also in the newer gen forum.... I have access to THIS info about the front axles... but no info about the rear axles. I am investigating the possibilities of parts interchange between Sooby and Datsun, specifically, searching for a junkyard source of parts for conversion of the U-joint style halfshafts on the Z and 510, to CV joints. The differentials used swap back and forth from Subaru to Nissan all day, even though most datsuns need more than the R-160 that is FAR and away the most common in Subaru Land. The actual axles themselves are quite likely easily sourced out of a Nissan, if the other parts needed (companion flanges, diff output flanges, etc) might be pulled from a 4wd ea82 or leggy.. BUT, I need data!! Overall axle length, spline count, bolt patterns on flanges, etc! ANY data is welcome, as I have no clue where to begin on this. Mods, I wanted to throw this into newer gen and older gen forums to get some attention before it landed in the retrofit forum. If you want to merge the threads after a couple of days, feel free.. but if its at all possible, I would appreciate letting them sit in the forums where they were planted for a day or two first. Link to comment Share on other sites More sharing options...
Gloyale Posted January 18, 2008 Share Posted January 18, 2008 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now