ronwomack Posted January 20, 2008 Share Posted January 20, 2008 hii there i am new to this forum. i recently picked up a 91 legacy wagon awd 5 speed. i recently checked my cel codes and have found code 33 which is for the vehilcle speed sensor. i have cleared the codes and rechecked to find the code is still there. my speedo is working fine but not my cruise control. any help would be appreciated ron womack Link to comment Share on other sites More sharing options...
Gloyale Posted January 20, 2008 Share Posted January 20, 2008 You may need to get a new VSS. It is in the instrument cluster. You could swap whole clusters, or just the VSS. Be aware, if you swap clusters, and the new one has lower miles, you must notify anyone you sell it to. You may want to check with you're DMV. If you're title already says Odometer exempt then don't worry about it. Link to comment Share on other sites More sharing options...
ronwomack Posted January 20, 2008 Author Share Posted January 20, 2008 thanks for your reply. i have replaced the cluster. thils vehicle was a victim of vandalism. all glass lights and instrumentation was broken. the cluster that i replaced the original with is from an auto transmission vehicle due to the unavailability of one from a five speed in my local wrecking yards. will the vss from an auto trans be different than a 5 speed? thanks ron womack Link to comment Share on other sites More sharing options...
ronwomack Posted January 20, 2008 Author Share Posted January 20, 2008 also. will a cel 33 prevent the cruise control from working? they would seem to be related. thanks ron womack Link to comment Share on other sites More sharing options...
Gloyale Posted January 20, 2008 Share Posted January 20, 2008 also. will a cel 33 prevent the cruise control from working? they would seem to be related.thanks ron womack Yes, definately. as far as the Auto V Manual question. I wouldn't think it would make a difference. But there may be a wiring difference that is not plug and play. You need to test the VSS, and if it outputs, then work on whether the VSS is connected to the ECU. Link to comment Share on other sites More sharing options...
ronwomack Posted January 20, 2008 Author Share Posted January 20, 2008 how do i go about testing the vss output? is there a documented procedure that i can reference? thanks ronwomack Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now