Subarutex Posted December 17, 2003 Share Posted December 17, 2003 Hey, anybody out there have any experience dealing with any frame shops in the seattle area? Left front of my RX needs to be tweaked back into trueness, from an accident prior to me owning it. Link to comment Share on other sites More sharing options...
Ratty2Austin Posted December 17, 2003 Share Posted December 17, 2003 my brother had his volvo taken to a frame shop off of 128th (airport road) in everett area a while back.. they straightened the bowed body and frame out well... I dont remember quite where it is, but I can probably find it again if i drove around in that area- (by memory) Link to comment Share on other sites More sharing options...
Flowmastered87GL Posted December 17, 2003 Share Posted December 17, 2003 I'll ask Eric (off of NASIOC) where he had my Impreza pulled. The guy did a good job on the straightening (but left alot of finish work for Eric to do before selling the car to me) The price was good though Link to comment Share on other sites More sharing options...
hass Posted December 17, 2003 Share Posted December 17, 2003 Hey the guy that painted the hydroplane that i worked on last year has a shop and i could probably get you a good deal there and one of the guys i work with there took his car in there and you can never tell that the trunk was up to the back of the drivers seat let me know dave Link to comment Share on other sites More sharing options...
GeneralDisorder Posted December 17, 2003 Share Posted December 17, 2003 Hass - you have a PM. You too flow... GD Link to comment Share on other sites More sharing options...
XSNRG Posted December 17, 2003 Share Posted December 17, 2003 Are you sure it was the previous owner or was it: "long straight...over crest...sharp right...CAUTION...HAZARD!!!" Link to comment Share on other sites More sharing options...
ezapar Posted December 17, 2003 Share Posted December 17, 2003 A chain and a telephone pole can work wonders. Link to comment Share on other sites More sharing options...
bushbasher Posted December 17, 2003 Share Posted December 17, 2003 set the mazda straight with a backhoe and a railroad tie Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now