slideshow86 Posted January 23, 2008 Share Posted January 23, 2008 Somthing really weird happened and It had to happen within the last time I fillled up. The constant power for my TRIP memory doesnt work. Now everytime I shut off the eng it resets. Bad Cluster? Its an ea82 Digi dash. Thanks in advance Jess Link to comment Share on other sites More sharing options...
Buddy Posted January 23, 2008 Share Posted January 23, 2008 Somthing really weird happened and It had to happen within the last time I fillled up. The constant power for my TRIP memory doesnt work. Now everytime I shut off the eng it resets. Bad Cluster? Its an ea82 Digi dash. Thanks in advance Jess might be that your battery is giving it last breaths of life better hurry up and perform CPR!!! j/k. but seriously i had that exact same problem with my GL-10 and i bought a new battery for it and problem solved. Link to comment Share on other sites More sharing options...
Hondasucks Posted January 24, 2008 Share Posted January 24, 2008 Check under the dash, there is a fuse under there that is the keepalive memory power supply wire for the dash, they were disconnected at the factory so the batteries didn't die on the way over, and connected at the dealership before delivery, it's possible it's corroded or something and not sending power to the dash. Link to comment Share on other sites More sharing options...
slideshow86 Posted January 24, 2008 Author Share Posted January 24, 2008 Thanks guys. it only did it for a few days, now it seems to be working? It has been 20ish at night but batt still holds a solid 12.5. I'm thinking loose connection maybe at that fuse? Hmmm Jess Link to comment Share on other sites More sharing options...
slideshow86 Posted February 24, 2008 Author Share Posted February 24, 2008 Bump Works a day or so, then out of no where clears it self? Any Ideas? I had pulled the dash to swap the heater core, I really didnt think I missed any plugs? Link to comment Share on other sites More sharing options...
Gloyale Posted February 24, 2008 Share Posted February 24, 2008 The *fuse* mentioned is not actually a fuse. It's just a connector. You'll probably have to drop the fuse panel to see it. Way up under the dash, on the far drivers side i a blue single pole connector taped to the harness. Make sure the 2 ends of it are connected. Link to comment Share on other sites More sharing options...
slideshow86 Posted February 24, 2008 Author Share Posted February 24, 2008 Sweet. Is this a constant power for the memory? The reason I ask is it functions just doenst ALWAYS hold memory? If there were a loose connection it would also act this way. Ill try to finagle my hand up there to chech. Thanks soo much! Jess Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now