xt6_4_life Posted January 27, 2008 Share Posted January 27, 2008 is it a good idea to use carb cleaner to clean out a maf. or is there something thats better for the job? any special ways it has to be done? Link to comment Share on other sites More sharing options...
hatchsub Posted January 27, 2008 Share Posted January 27, 2008 DO NOT USE CARB CLEANER. It is way too strong for the delicate components of the MAF. They make specific sprays for cleaning out the MAF. There is also a spray that is electrical component spray that i use since i couldnt find MAF cleaner. It cleans electrical components and does not damage them. If you use carb cleaner on it you might be writting a check for a new MAF. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted January 27, 2008 Share Posted January 27, 2008 Brake cleaner works fine on the EA82 unit's. Newer stuff, or other brands may be more sensitive to such cleaning agents but the EA82 technology is pretty basic. "MAF" cleaner is just diluted brake cleaner anyway. Make sure to clean out the by-pass hole and slot in the MAF housing - that's what allows the MAF to have adequate airflow. Carb cleaner should not be used - WAY too harsh and doesn't evaporate without leaving a residue. GD Link to comment Share on other sites More sharing options...
xt6_4_life Posted January 27, 2008 Author Share Posted January 27, 2008 not a moment too soon... already had the intake torn apart and ready to go. gona go pick up some electrical part cleaner right now.... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now