fud24682000 Posted February 10, 2008 Share Posted February 10, 2008 With A/C I have both an electric and an engine driven fan. I have an oil leak which appears to be from a front seal, and am hoping to do it myself. Haynes says to remove both fans prior to removing the radiator, but after removing the 4 nuts holding the engine fan to the water pump pulley I can't get the hub off. The 4 studs are about 3/16" too long for the fan to clear the radiator. I'm stuck here---any suggestions? Ray Mac Link to comment Share on other sites More sharing options...
GeneralDisorder Posted February 10, 2008 Share Posted February 10, 2008 double-nut the studs and remove them from the pulley. GD Link to comment Share on other sites More sharing options...
fud24682000 Posted February 10, 2008 Author Share Posted February 10, 2008 Good, thanks. Ray Mac. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now