shanonsf Posted December 20, 2003 Share Posted December 20, 2003 hey there- can anybody out there give me a labor figure on how much a RX rear stub axle bearing should cost to have pressed in? rear control arm is out of car, RX bearring gonna cost $110.... :eek: dealer quoted me 2hrs labor at $140................eh?! thx shanonsf PS: anybody got a good RX rear bearring they wanna part with?? Link to comment Share on other sites More sharing options...
v8vega215 Posted December 20, 2003 Share Posted December 20, 2003 $140 is way too much to pay to have the bearings pressed if the whole thing is out of the car, if it is anything like the ea81 cars. I did my rear bearings myself for less than $30 per side by going down to napa with the part number off the back of the race. If I was going to have someone else press them together I would go down to a machine shop because they could probably do it in less than 20min and for way less than $140. The dealer saying $140 is letting you know that they have never serviced the bearings on an older soob and they dont have a clue what they are doing. Link to comment Share on other sites More sharing options...
shanonsf Posted December 20, 2003 Author Share Posted December 20, 2003 hhhmmm, I went to a Kragen/Napa and they quoted me a similar $$ for the bearring......'bout 3x the price for an ol' EA81........ are they that different? or COULD I take the control arm/bearring assembly to a shop and have them match & install it..?? thx shanonsf Link to comment Share on other sites More sharing options...
rallyruss Posted December 20, 2003 Share Posted December 20, 2003 Shannon dont do it! standard labor time for a rear wheelbearing job(complete) is 1.4hrs according to alldata. now if you had it all out and ready to go? 2 hrs? no way dude. and 110$ for the bearing? I can hook you up for less I am sure. I can get an actual quote if you have not purchased it already. as for pressing. I only charge 40$ per hour:brow: 100 cheaper than the dealer. let me know if you want the hook up. espically if you pull it and bring it down to me. might just save you a couple of bills Link to comment Share on other sites More sharing options...
shanonsf Posted December 20, 2003 Author Share Posted December 20, 2003 !!! HEy Russ- let's make a deal!! let's figure something out soon!! I'd really like to see your RX too! I'll call you over the weekend........... -shanonsf Link to comment Share on other sites More sharing options...
rallyruss Posted December 20, 2003 Share Posted December 20, 2003 yup thats me:D yeah give me a call or an e mail I can get you goin. also stormtrooper (donald) is familiar with that job. he does it JY style swaparoo. Cheers, rallyruss@yahoo.com did you run that Jaos rally yet? Link to comment Share on other sites More sharing options...
shanonsf Posted December 20, 2003 Author Share Posted December 20, 2003 Russ you've got mail............. shanonsf Link to comment Share on other sites More sharing options...
shanonsf Posted December 20, 2003 Author Share Posted December 20, 2003 cool but what's a pin socket tool.......? shanonsf Link to comment Share on other sites More sharing options...
FlyScooby Posted December 20, 2003 Share Posted December 20, 2003 Beware: Knocking those bearings out with a drift is not that easy. I would just take the hubs to a machine shop and have them pressed out. I did 10 bucks a side. All 4 bearings Inner and Outer. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now