Sweet82 Posted February 28, 2008 Share Posted February 28, 2008 Anyone know how to get to the inst. panel idiot lights on a early to mid 90's Camry? I can't seem to reach up far enough under the dash as there is too much crap in the way? Do I un-screw the inst. panel and replace them from the front? Anyone dealt with this concept? Thanks, Link to comment Share on other sites More sharing options...
waimaks Posted February 29, 2008 Share Posted February 29, 2008 I don't know about camrys inparticular but with most cars I've encountered its usually easiest to remove the entire cluster, which isn't too hard. Then replacing the bulbs is easy peasy! Link to comment Share on other sites More sharing options...
Sweet82 Posted February 29, 2008 Author Share Posted February 29, 2008 The question becomes where are the hidden screws to remove it?:cool: Link to comment Share on other sites More sharing options...
Hondasucks Posted March 5, 2008 Share Posted March 5, 2008 I'll look it up at work tomorrow I think you have to snap the dash trim out like on the 1st gen Legacies, with hidden screws in the vents and stuff. Not 100% sure though cuz I've never had to yank the cluster out of a Camry. Link to comment Share on other sites More sharing options...
Sweet82 Posted March 5, 2008 Author Share Posted March 5, 2008 My guess is it's hidden screw/remove cluster process. I'd prefer to avoid that, I sure like to hear that it can be easily done from the back side. I can't wait... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now