Deltacam Posted February 29, 2008 Share Posted February 29, 2008 We would like to have actual dyno #'s for our new website being built, and need a completely stock 2.5 sohc to take their car to Pacific Import Auto and run a dyno pull with all stock components, then pay to have them swap to our torque cams. Then after the swap run another dyno pull to see gains of cam swap alone. any interest? we pay for the dyno time and you keep the cams. Link to comment Share on other sites More sharing options...
aircraft engineer Posted February 29, 2008 Share Posted February 29, 2008 these guys are for real - they sure saved my bacon. But I was doing a 2.2 not a 2.5 remember guys, the torque curves are really helpful to those who know how to read them Link to comment Share on other sites More sharing options...
idosubaru Posted February 29, 2008 Share Posted February 29, 2008 the torque curves are really helpful to those who know how to read them wow, spoken like a true engineer! Link to comment Share on other sites More sharing options...
porcupine73 Posted February 29, 2008 Share Posted February 29, 2008 Wow that sounds cool. I have a stock 2.5L sohc in '00 outback wagon.......unfortunately I am 2610 miles from Pacific Import Auto..... Link to comment Share on other sites More sharing options...
Deltacam Posted February 29, 2008 Author Share Posted February 29, 2008 not raining here ; ) ROAD TRIP ! Link to comment Share on other sites More sharing options...
aircraft engineer Posted February 29, 2008 Share Posted February 29, 2008 not raining here TODAY, you mean... (this is warshington - if you don't like the weather wait 5 minutes and it will change ) Link to comment Share on other sites More sharing options...
thatswhatshesaid Posted February 29, 2008 Share Posted February 29, 2008 I've got a 2000 Outback! I'm in! When can I do it? Where do I need to go! How much will it cost me? Woo hoo! Cams! Link to comment Share on other sites More sharing options...
Bigbusa Posted February 29, 2008 Share Posted February 29, 2008 nice heads Link to comment Share on other sites More sharing options...
aircraft engineer Posted February 29, 2008 Share Posted February 29, 2008 delta camshafts has a website http://www.deltacam.com/ and a Tacoma phone number (I don't work there, I just dealt with them earlier in the week) Link to comment Share on other sites More sharing options...
porcupine73 Posted March 1, 2008 Share Posted March 1, 2008 hehe yes that would make a nice roadtrip from Buffalo NY to Tacoma!. There was a great write up about Delta Cams in a recent issue of Subiesport or Sport Compact Car. If I can find it maybe I'll scan it in and post it, I learned a lot! Link to comment Share on other sites More sharing options...
Qman Posted March 1, 2008 Share Posted March 1, 2008 hehe yes that would make a nice roadtrip from Buffalo NY to Tacoma!. There was a great write up about Delta Cams in a recent issue of Subiesport or Sport Compact Car. If I can find it maybe I'll scan it in and post it, I learned a lot! It was Subiesport. It was a good write up for sure. The guys at Delta will treat you right. I have been dealing with them for years. The last 6 yrs in Subarus. Jon and Scott will treat you right, every time! Been sponsoring me for a long time. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now