bigo1966 Posted March 9, 2008 Share Posted March 9, 2008 What is the cheapest and easiest way to get 2" of lift on front of an EA82? Link to comment Share on other sites More sharing options...
bigo1966 Posted March 11, 2008 Author Share Posted March 11, 2008 so no one knows how to get 2 inches of lift? Link to comment Share on other sites More sharing options...
TheYeti Posted March 11, 2008 Share Posted March 11, 2008 Nope, but I did a search and came up with this wonderful link http://www.ultimatesubaru.org/forum/showthread.php?t=24980 2'' kits aren't a common one, but the link above should give you some ideas. Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted March 11, 2008 Share Posted March 11, 2008 cut 6 - 2x2 square tubing 1-1/2 long , drill 3/8 holes in them and mount them on top of the struts, the axles can take it , and yes the wheel camber is effected but you wont notice it driving it SJR Link to comment Share on other sites More sharing options...
bigo1966 Posted March 11, 2008 Author Share Posted March 11, 2008 2x2 squares. I like the sounds of that, easy...and i have 2x2 laying around. Are there any pics of this mod out there? this will get the buggyroo level and possibly stop the swampers from being cut when landing from a jump. Next buy is a roof rack, full size spare and possibly 1.5-2" wheel spacers. Link to comment Share on other sites More sharing options...
Rollie715 Posted March 11, 2008 Share Posted March 11, 2008 and possibly 1.5-2" wheel spacers. Just a comment on spacing your wheels out further. It may give you more clearance on the inside, but will give you less clearance at the rear portion of your front wheel wells when turning the wheel sharp left or right. You may want to consider keeping your wheels tucked in as tight as you can. Rollie Link to comment Share on other sites More sharing options...
testy Posted March 11, 2008 Share Posted March 11, 2008 since its on a buggy, make sure you weld the peices together. You should also consider some seem welding if you havent already. Link to comment Share on other sites More sharing options...
awesomedude Posted March 11, 2008 Share Posted March 11, 2008 I guess this is a good place to post my unfinished website.One of the only things that i have actually finished is my step by step on lifting an ea82 tha way i did. http://www.subazero.com. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now