one eye Posted April 9, 2008 Share Posted April 9, 2008 I think that may 3rd would be a good day to go up to walker and try out the new ride anyone who wishes to come, may come along. If this day doesn't work we could try the week before or after. And by We I mean I. Meeting place At GI Joe in Mt.Vernon @ 10:00am Rob, Scott, Will, Alan, jess, Bo, Kenny, Eric, Ken true2blue, Gloyale? any of you guys up to it? I'll ask a few couple of the other guys around here that aren't on the board. Jeff Link to comment Share on other sites More sharing options...
3eyedwagon Posted April 9, 2008 Share Posted April 9, 2008 Sounds good to me. Want to do a bumper before then? April 26 27 are the wheeling trip up here I told you about. Don't forget. So count me in. I'll escort you guys to the end of the Upper Mainline, then turn around. That is if that's the way you go. Then I may go back down to the Lower Mainline, explore the jaunt around the gate, and the trail to meet up with you guys. Sorry, but I'm just not game for the rocks at the end of the Upper Mainline. Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted April 9, 2008 Share Posted April 9, 2008 that day is out for me , Im ready now how bout this Saturday, ? Link to comment Share on other sites More sharing options...
r_kirky Posted April 10, 2008 Share Posted April 10, 2008 I went to the Smokey Point junkyard today. Got four EA82 rear cups and one EA81 rear shaft would like to have gotten two but somebody had already scooped up all EA81 rear axles... Jeff? are those the ones I destroyed last trip? Hope to have the hatch in prime form or cut up into scrap metal depending on how the test run goes. -Rob Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted April 10, 2008 Share Posted April 10, 2008 Hope to have the hatch in prime form or cut up into scrap metal depending on how the test run goes.-Rob I hear scrap prices are up Link to comment Share on other sites More sharing options...
one eye Posted April 10, 2008 Author Share Posted April 10, 2008 I went to the Smokey Point junkyard today. Got four EA82 rear cups and one EA81 rear shaft would like to have gotten two but somebody had already scooped up all EA81 rear axles... Jeff? are those the ones I destroyed last trip? Hope to have the hatch in prime form or cut up into scrap metal depending on how the test run goes.-Rob I would think that those where the ones that I got. I took them off a "camo" hatch, but one axle got stuck on me. and a blue wagon. You should have swung by my place. I was probably doing something subaru Oriented:) . Not only that I have all the parts you would have needed to do the "GD axle swap". But it's all good. I'm going to let my Brat lay low for a while, I figured I'll beat the crap outa the new Gen3 wagon for a while. I just hate the Idea of mashing in a quarter panel in on the brat. Oh scott by the way the Wagon Does have 30x9.50x15's on it now. Bad part is one door doesn't open any more but it sure looks cool:banana: I'll post some pics up later today. I have a job interview at 10:00 in Everett. So I kinda got to get going, but I'll put them up later today. Jeff Link to comment Share on other sites More sharing options...
r_kirky Posted April 10, 2008 Share Posted April 10, 2008 I would think that those where the ones that I got. I took them off a "camo" hatch, but one axle got stuck on me. and a blue wagon. You should have swung by my place. I was probably doing something subaru Oriented:) . Not only that I have all the parts you would have needed to do the "GD axle swap". But it's all good. I'm going to let my Brat lay low for a while, I figured I'll beat the crap outa the new Gen3 wagon for a while. I just hate the Idea of mashing in a quarter panel in on the brat. Jeff I almost stopped by but didn't want to just pop in unannounced and wasn't sure where your house is exactly. Next time -Rob Link to comment Share on other sites More sharing options...
one eye Posted April 11, 2008 Author Share Posted April 11, 2008 I almost stopped by but didn't want to just pop in unannounced and wasn't sure where your house is exactly. Next time-Rob right on you still got my number? Jeff Link to comment Share on other sites More sharing options...
r_kirky Posted April 11, 2008 Share Posted April 11, 2008 No. I guess I forgot to enter it into my phone. Got the axles together had a hard time finding that grease in a size other than total ripoff schucks size. but did find it in a tub, 4.99 for 14oz the squeeze tubes cost 5.69 with only 4oz. So fingers crossed. Later -Rob Link to comment Share on other sites More sharing options...
one eye Posted April 11, 2008 Author Share Posted April 11, 2008 Sweet, I hope that, that will solve the problem for ya. I'll PM ya my #. Jeff Link to comment Share on other sites More sharing options...
ezapar Posted April 17, 2008 Share Posted April 17, 2008 You'll have to count me out of a Walker Valley trip till Summer probably. I just don't have a weekend to spare for it. . . Link to comment Share on other sites More sharing options...
one eye Posted April 18, 2008 Author Share Posted April 18, 2008 I think this run might have to hold off for a couple weeks, My wagon is not 100% yet and I need to replace the bottom end. there are Just a few bugs that need to be fixed and they are kinda really major. I started this thread thinking I had everything going good with my car and now that I have driven it for a bit, I've found there are some things that need help. I'm not saying it is off but I think I'm out for now. Sorry to try and put a run together, and then I drop out. I don't want to get up there and have everything fall apart. Then it is no fun for me or anyone else. I am going to pull the motor this next week and try again.:-\ Jeff Link to comment Share on other sites More sharing options...
3eyedwagon Posted April 18, 2008 Share Posted April 18, 2008 Does this mean a no-go for the last weekend in this month???? I think you should just bring it up here, and "finish it off"..... Link to comment Share on other sites More sharing options...
one eye Posted April 18, 2008 Author Share Posted April 18, 2008 Does this mean a no-go for the last weekend in this month???? I think you should just bring it up here, and "finish it off"..... No no, I figure I'll be able to finish it off there and dive back in on it. I love that, finish it off! Jeff Link to comment Share on other sites More sharing options...
3eyedwagon Posted April 18, 2008 Share Posted April 18, 2008 No no, I figure I'll be able to finish it off there and dive back in on it. I love that, finish it off! Jeff Good. Now we just gotta get Woody to go. Link to comment Share on other sites More sharing options...
slideshow86 Posted April 27, 2008 Share Posted April 27, 2008 Sorry guys, I havent been on in awhile. I am training to be a MSF instructor. I have had no free time in along time. I have been riding my bike's everyday to save gas and money and havent even driving my cars in awhile, I am actually going to go fire them all up today and let them warm up... Hope to see ya guys soon... Link to comment Share on other sites More sharing options...
one eye Posted April 28, 2008 Author Share Posted April 28, 2008 Sorry guys, I havent been on in awhile. I am training to be a MSF instructor. I have had no free time in along time. I have been riding my bike's everyday to save gas and money and havent even driving my cars in awhile, I am actually going to go fire them all up today and let them warm up... Hope to see ya guys soon... I had kinda wondered about you, I hadn't seen any post from you in quite a while. Good to see you didn't give up on the Subaru world. Welcome back. Jeff Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now