timstiles Posted April 10, 2008 Share Posted April 10, 2008 My newly acquired 96 Legacy has illumination at night for all the hvac buttons but not the fan speed dial. Should it be lit up as well ? Link to comment Share on other sites More sharing options...
aircraft engineer Posted April 10, 2008 Share Posted April 10, 2008 probably - I think they mandated that all safety equipment had to be illuminated (the fan switch falls into that category) - bad bulb? Link to comment Share on other sites More sharing options...
timstiles Posted April 10, 2008 Author Share Posted April 10, 2008 Not sure, looking for someone to say 'mine lights up' before digging into the dash. Link to comment Share on other sites More sharing options...
EVOthis Posted April 10, 2008 Share Posted April 10, 2008 if your speaking about the fan where it says (1 2 3 4) yes it is supposed to light up.....i have a 96' legacy also.......when i acquired my car none of the climate control lights worked at night.......there are 3 small bulbs behind there i believe you can get them at radio shack for pretty cheap (i bought them at subaru) i cant remember the parts numbers off hand but do a search and you might find them (i think i got the PN from someone on the board)....its a pretty simple job........ Link to comment Share on other sites More sharing options...
hklaine Posted April 10, 2008 Share Posted April 10, 2008 http://www.scoobymods.com/forums/showthread.php?s=&threadid=91 the long one goes behind the fan control. i did these in my car when i bought it as well - apparently failure of these bulbs is a quite common problem. Link to comment Share on other sites More sharing options...
timstiles Posted April 10, 2008 Author Share Posted April 10, 2008 Awesome, thanks for the help everyone! Link to comment Share on other sites More sharing options...
timstiles Posted April 11, 2008 Author Share Posted April 11, 2008 Went to the dealer today and he sold me all long bulbs. Doh! I wished I would have printed out the part numbers in the url above first. The long ones were the only part numbers on the dealers blowup of the hvac controls. But I put the long bulb in and the fan switch lights up now. I still need to get 1 short bulb. Question on that though, is it possible to rotate the bulb base into a position where it is not making contact on the circuit board? Tim '96 Legacy Wagon with Saabaru 92X Wheels and '97 Legacy GT interior Link to comment Share on other sites More sharing options...
EVOthis Posted April 11, 2008 Share Posted April 11, 2008 yes it is possible.....i made that mistake i thought it was all the way in.....so when i would hit the climate control area at night it would light up and hit it again and it would go back off.....i just took it all back apart and now its good..... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now