Scarpachy Posted April 18, 2008 Share Posted April 18, 2008 Who can tell me how to program a 2nd remote to a 00 Ob wgn. For what i have read. You unlock all doors, foot on brake, turn key on to off roughly 10 times until horn honks. Then open and close drivers door. press button on new remote, and it should be done. Pull keey out and it should honk 3 times. I can't get horn to honk. And yes it does work. Any help would be much appreciated.:-\ Link to comment Share on other sites More sharing options...
J A Blazer Posted April 18, 2008 Share Posted April 18, 2008 I remember having similar difficulty when I tried to program a 2nd remote for my 2000 OBW. One of the eBay vendors has instructions on his site, but the one step not mentioned was that you have to first disable any OE security system that may be on your vehicle. Link to comment Share on other sites More sharing options...
nickb21 Posted April 18, 2008 Share Posted April 18, 2008 Been there, done that. I assume this is an OE remote? http://www.ultimatesubaru.org/forum/showpost.php?p=40639&postcount=6 Open driver door. Unlock. Get in, close door. Cycle key, lock->on 10 or 11 times. Got the honk. Opened and close driver door. Pushed a button, got two honks. Open and close driver door. Pushed a button on the second remote, got two honks. Removed key, and got 3! Cheers. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now