pierman2 Posted April 20, 2008 Share Posted April 20, 2008 Anyone with experience with SJR or HTI lifts. Does the 2" SJR ea 82 suspension lift eat axles? I've also not seen feedback on any HTI products, although the roofrack looks impressive in photos. Anyone purchased an ea 81 or 82 lift from HTI? Opinions welcomed. Thanks. Link to comment Share on other sites More sharing options...
Reveeen Posted April 20, 2008 Share Posted April 20, 2008 The newest EA82 car would be a 1994 Loyale, this being 2008, there is a very good chance that over the 14 years the existing suspension would have sagged an inch, add that to picking up the suspension an inch, and I can't see the danger to any axles lifting an old car in the minimalist fashion (ie:lifting only the struts 2"). Though I have purchased no lifts, preferring to make my own, I fabbed my own blocks (6") and stole an extra inch in the struts, with new struts and springs. Of course those very same axles are likely at least 14 years old, and the boots are likely hard, and brittle, so maybe it would be prudent to re-boot the outer CV's at the same time while you are in there. Link to comment Share on other sites More sharing options...
Numbchux Posted April 20, 2008 Share Posted April 20, 2008 Well, If you're going to be pushing your rig to the limit, all lifts are not created equal. I don't know how HTI sets up their lifts, but SJR makes an awesome product. and has tested everything he makes. He's had numerous rigs, and has wheeled the crap out of them. 2" of extra axle strain is a bunch, and would probably work fine offroad......but the high rpms of street driving (especially on the freeway) is what will kill them. Link to comment Share on other sites More sharing options...
chazmataz Posted April 21, 2008 Share Posted April 21, 2008 the lifting and compressing of the front suspension during acceleration, hard shifting and braking (modrate to hard or even sudden) eats them. the constant pulling them apart and shoving them back together combined with the sudden angle changes during those operations named above is not good even with a small lift. my 84'wagon with the suspension cranked with stock adjustment and 14" tires is a little hard on axles not as much as my 86' with the 15" M/T tires but the strain of pushing bigger tires also contributes to axle failure. anything other then stock suspension height and stock size tires will cause accelarated axle failure, driving habits with also aid in this. Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted April 21, 2008 Share Posted April 21, 2008 . Does the 2" SJR ea 82 suspension lift eat axles? . Thanks. the SJR 2" lift is : 2" suspension in front ,and 1" suspension 1" body in back Link to comment Share on other sites More sharing options...
michael appel Posted April 22, 2008 Share Posted April 22, 2008 Just as long as the axles are straight across and not arched all the time they last awhile but it all depends on how you drive tires and heavy foot Link to comment Share on other sites More sharing options...
Andy FitzGibbon Posted April 25, 2008 Share Posted April 25, 2008 The adjustable struts on the '85 and '86 cars allowed you to add over an inch to the ride height- 2" blocks isn't that much more. Andy Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now