nocashrider Posted April 28, 2008 Share Posted April 28, 2008 hey all im kinda in a jam with my current subaru condition the car runs like a champ but i cant get the clutch pedal to engauge the clutch so it wont shift so i was wodering if there is anyone around that might be knowledgeable on the subject an be willing to take a look at it so i can have something to drive because borrowing a tahoe to commute sucks gas like no other Link to comment Share on other sites More sharing options...
GeneralDisorder Posted April 28, 2008 Share Posted April 28, 2008 Cable is likely broken. GD Link to comment Share on other sites More sharing options...
edrach Posted April 28, 2008 Share Posted April 28, 2008 Or badly out of adjustment. Link to comment Share on other sites More sharing options...
noob2soob Posted April 29, 2008 Share Posted April 29, 2008 you could always float the gears lol nah check the cable I'm thinkin thats the problem too Link to comment Share on other sites More sharing options...
one eye Posted April 29, 2008 Share Posted April 29, 2008 Just be ready. They can kinda be a bear. Jeff Link to comment Share on other sites More sharing options...
nocashrider Posted April 29, 2008 Author Share Posted April 29, 2008 it worked before just the clutch needed replaced and thats all i did so i dont know why the cable wouldnt work now? Link to comment Share on other sites More sharing options...
Turbone Posted April 29, 2008 Share Posted April 29, 2008 You can PM me your addy/cell # and I'll try and come by tomorrow and take a look. Link to comment Share on other sites More sharing options...
edrach Posted April 29, 2008 Share Posted April 29, 2008 If the cable had snapped the clutch pedal wouldn't return after you stomp it to the floor. I still think the cable is out of adjustment. Link to comment Share on other sites More sharing options...
wr-ecks Posted April 29, 2008 Share Posted April 29, 2008 hey all im kinda in a jam with my current subaru condition the car runs like a champ but i cant get the clutch pedal to engauge the clutch so it wont shift so i was wodering if there is anyone around that might be knowledgeable on the subject an be willing to take a look at it so i can have something to drive because borrowing a tahoe to commute sucks gas like no other is the clutch pedal as stiff as its supposed to be? too stiff?? or no resistance? Link to comment Share on other sites More sharing options...
zukiru Posted April 29, 2008 Share Posted April 29, 2008 I had to adjust the pedal on my Starion after changing the clutch. if it was really worn down and you put in a new one then that's what the effect would be without adjustment no able to put it in gear. (or really hard to) Link to comment Share on other sites More sharing options...
nocashrider Posted April 29, 2008 Author Share Posted April 29, 2008 yea i should have put this in the OP but the pedal feels like its not even hooked up it has no resistance at all but when i had someone push it in i could see the cable moving so idk Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now