SUBARU3 Posted May 8, 2008 Share Posted May 8, 2008 Are the cam and crank seals on a 99 Forester SOHC 2.5 the same as those on a 95 2.2 engine. I believe they are the same. Todd Link to comment Share on other sites More sharing options...
hohieu Posted May 8, 2008 Share Posted May 8, 2008 Yes, your hunch is correct. They are indeed the same. I replaced cam and crankshaft seals for my 99 Forester with part numbers 806732150 & 806733030, respectively. Link to comment Share on other sites More sharing options...
idosubaru Posted May 8, 2008 Share Posted May 8, 2008 don't forget to replace the cam cap orings too while you're doing this. Link to comment Share on other sites More sharing options...
SUBARU3 Posted May 10, 2008 Author Share Posted May 10, 2008 Thanks guys! Link to comment Share on other sites More sharing options...
msmithmmx Posted May 13, 2008 Share Posted May 13, 2008 The cam and crank seals, they come packed with some grease. Is that high temp grease? Link to comment Share on other sites More sharing options...
EVOthis Posted May 13, 2008 Share Posted May 13, 2008 really?...i bought my cam seals and they didnt come with anything on them....i just lubed them up with a little oil before install.... Link to comment Share on other sites More sharing options...
hohieu Posted May 14, 2008 Share Posted May 14, 2008 My front seals didn't come packed with grease either, but my rear main seal does. Don't know if it's high temp grease, but you don't need to remove it. It's assembly grease that provides some initial lubrication while the seal breaks in. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now