nocashrider Posted May 13, 2008 Share Posted May 13, 2008 so i finished putting everything back together after taking the engine out of my 86 gl wagon carbed 2 wheel drive and now i cant remember where the red wires go for the ignition coil. 1 goes to the distributer but idk where the other one goes and its the only thing stopping me from being finished anyone got any suggestions or pictures??? Link to comment Share on other sites More sharing options...
Turbone Posted May 13, 2008 Share Posted May 13, 2008 Black to the + terminal and yellow to the - terminal. Not sure where the red one goes:confused: Link to comment Share on other sites More sharing options...
nocashrider Posted May 13, 2008 Author Share Posted May 13, 2008 ok so its daytime again and i found my camera so now i have a picture to hopefully have someone help me on this one so here it is. the wire in question is the one obviously circled in red it just comes off the little black square that the red wire goes into on the right and goes out of picture into a loop and comes back into the picture so any help is appreciated Link to comment Share on other sites More sharing options...
Turbone Posted May 13, 2008 Share Posted May 13, 2008 Where does the other end go? To a silver cylindrical thing? If so, I think it goes to ground. Its a noise suppressor. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now