Jump to content
Ultimate Subaru Message Board

Sealing up the cam tower


Recommended Posts

Make sure it is clean! I stuffed rags in mine and let them soak up the oil for a day so it wouldn't drip down as I was putting it together.

 

I used Loctite 518 (Permatex 51813) but the key is to keep it clean. Use Acetone to clean the surfaces.

Link to comment
Share on other sites

  GeneralDisorder said:
OEM they are sealed with the three-bond equivelent of RTV. That's what I've always used.

 

GD

 

+1, don't use too much (issues of extra sealant going places where you don't want it are documented well), make sure you've cleaned out the groove on the mating surfaces . . .

 

chris

Link to comment
Share on other sites

I,ve got some stuff called The Right Stuff. I have used it for a few other non subaru related projects, it should do the trick, right? And the little o ring in there, does this absolutly need to be replaced?

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...