GREENSUBIE Posted May 30, 2008 Share Posted May 30, 2008 I cant seem to find a post that has a step by step or if the rear disc brakes off an 88 gl 10 ea82t 4 wheel drive would fit on my 86 gl 4 wheel drive hatch ? any help? Thanks SS Link to comment Share on other sites More sharing options...
Bucky92 Posted May 30, 2008 Share Posted May 30, 2008 Yes they will.. I have done the swap myslef and printed out a step by step that is here in the repair manual ..I think.. Its super easy..I did a FWD drum to disk swap in about 2 hours total As long as the donor is 4WD its the right stuff..4WD to 4WD,..FWD to FWD Link to comment Share on other sites More sharing options...
Bucky92 Posted May 30, 2008 Share Posted May 30, 2008 Here ya go..the link to the step by step I used to do mine: http://www.ultimatesubaru.org/forum/showthread.php?t=49975 Link to comment Share on other sites More sharing options...
TheSubaruJunkie Posted May 30, 2008 Share Posted May 30, 2008 Cant get any more steps than that. pretty basic swap. Your hatch is no different than any other Subaru as far as the rear end is concerned. Link to comment Share on other sites More sharing options...
GREENSUBIE Posted May 30, 2008 Author Share Posted May 30, 2008 alright thanks i just have been so busy i havent gotten the chance to take a close look so i figured id ask here. this will be sweet:banana: thanks SS Link to comment Share on other sites More sharing options...
Spiffy Posted May 30, 2008 Share Posted May 30, 2008 http://www.ultimatesubaru.org/forum/showthread.php?t=49975 that's the guide I used when I took the rear discs off my '88 turbo wagon and put them on my '82 wagon... really easy... although getting the right combination of brake lines took a few minutes... --Spiffy Link to comment Share on other sites More sharing options...
GREENSUBIE Posted June 10, 2008 Author Share Posted June 10, 2008 Since i will be putting rear disc brakes on my hatch, the donor parts are off a turbo wagon, will i need a porportioning valve ? Link to comment Share on other sites More sharing options...
TheSubaruJunkie Posted June 10, 2008 Share Posted June 10, 2008 Nope. Link to comment Share on other sites More sharing options...
Spiffy Posted June 10, 2008 Share Posted June 10, 2008 Since i will be putting rear disc brakes on my hatch, the donor parts are off a turbo wagon, will i need a porportioning valve ? it's been debated here before... I didn't use a valve and I haven't had any issues at all, and I've hit the brakes hard plenty of times since the swap... --Spiffy Link to comment Share on other sites More sharing options...
LuberJack Posted June 10, 2008 Share Posted June 10, 2008 Don't mean to hijack this thread, but it looks like the question was answered already. My car has a 5 lug swap on the wheels (done before I purchased it), how would this effect doing the rear disc swap? Link to comment Share on other sites More sharing options...
Turbone Posted June 11, 2008 Share Posted June 11, 2008 Don't mean to hijack this thread, but it looks like the question was answered already. My car has a 5 lug swap on the wheels (done before I purchased it), how would this effect doing the rear disc swap? It seems odd that you dont already have rear disc if a 5 lug swap was done. Have the rotors/drums been redrilled or the wheels? You will need the rear disc's from a XT6 for any EA82 swap. Link to comment Share on other sites More sharing options...
edrach Posted June 11, 2008 Share Posted June 11, 2008 Since i will be putting rear disc brakes on my hatch, the donor parts are off a turbo wagon, will i need a porportioning valve ?I've done at least a dozen of those swaps including two Brats which I'm still driving and never needed to change a proportioning valve change. Link to comment Share on other sites More sharing options...
LuberJack Posted June 11, 2008 Share Posted June 11, 2008 It seems odd that you dont already have rear disc if a 5 lug swap was done. Have the rotors/drums been redrilled or the wheels?You will need the rear disc's from a XT6 for any EA82 swap. Hm...I'm not sure what was done for the swap, as the previous owner did it and didn't tell me anything about it. Haha Is the XT6 5 lug? Link to comment Share on other sites More sharing options...
LuberJack Posted June 11, 2008 Share Posted June 11, 2008 Hahaha....wowwww...never mind. I just went out and re-parked my car and realized it's still 4 lug. Thats what I get for not being around my car more often, I don't know what I was thinking! Link to comment Share on other sites More sharing options...
TheSubaruJunkie Posted June 12, 2008 Share Posted June 12, 2008 Yeah i was going to say... your car looks (in the pictures in the other thread) to have 13" Cal Master rims, which only came in 4lug. -Brian Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now