JWX Posted January 2, 2004 Share Posted January 2, 2004 ok, my clutch pedal sticks bout an inch or so from being fully up. what would cause this? and on to the odd sound. This morning I'm going down the road, and start hearing this turbo sound(whrrr ok so maybe a sick turbo. but a turbo sound none the less) I was in third about to shift to fourth. It didn't do it agian until I was driving to get gas this evening so I'm thinking it cold related. (sorry for the long post) Link to comment Share on other sites More sharing options...
riverrat Posted January 2, 2004 Share Posted January 2, 2004 A shot inthe dark with the clutch would be your cable begining to snap.Mine have always broke at the clutch peddle.You should be able to inspect it at the peddle. I have no idea with the termite noises:D Link to comment Share on other sites More sharing options...
Danbob99 Posted January 2, 2004 Share Posted January 2, 2004 on the sound, you don't happen to have an aftermarket stereo and apmlifier installed do you? Link to comment Share on other sites More sharing options...
Skip Posted January 2, 2004 Share Posted January 2, 2004 JW, on the pedal problem, RiverR has a must look at answer. If that is not the case check the Hill Holder cable. The spring on the HH is the return spring. Possibly it is not returning the "free play" in the pedal. BUT check for frayed inner cable bits as RR said. The turbo "whirrrrrr", could be the speed 0 cable wanting some lube. They will make a similar noise in the cold. HTH Link to comment Share on other sites More sharing options...
JWX Posted January 3, 2004 Author Share Posted January 3, 2004 if's not the clutch cable, thats about month old. and it did it before teh new cable. The sound I'm thinking was a fluik or I'm hearing things agian(looks around) Link to comment Share on other sites More sharing options...
JWX Posted January 3, 2004 Author Share Posted January 3, 2004 oh and I do have an aftermarket stereo but no amp Link to comment Share on other sites More sharing options...
Danbob99 Posted January 3, 2004 Share Posted January 3, 2004 well, i was asking about the amp cuz if you wire your ground to close to the ground of your alternator, you get somenasty feed back, reminicent to that of a turbo, i guess you would say. Link to comment Share on other sites More sharing options...
Skip Posted January 3, 2004 Share Posted January 3, 2004 Is the cable routed under the steering column below the master cyl? If not it could be binding there. Guess the HH is okay as you don't mention checking it Link to comment Share on other sites More sharing options...
JWX Posted January 3, 2004 Author Share Posted January 3, 2004 I routed the cable the right way, the same as the old. but it shouldn't be binding. I'm thinking it could be the HH. Anyway to take that thing off or replace it? it doesn't work anyways(as for the holding it on hills) Link to comment Share on other sites More sharing options...
incognito Posted January 3, 2004 Share Posted January 3, 2004 check the clutch pedal freeplay.. 10 and 12mm open end wrenches are needed... make sure u have about 1/4" freeplay. Link to comment Share on other sites More sharing options...
Skip Posted January 3, 2004 Share Posted January 3, 2004 Well you said it did this with the old cable also, if it was routed incorrectly...never mind..as you say. The HH is no doubt out of adjustment, this probably is why it isn't holding. Thje FSM even details a try and error method, adj tighter -try it, adjust try it... T&E so to speak. If you manualy pull the clutch fork does the pedal come to the proper position? Sorry I couldn't help. Link to comment Share on other sites More sharing options...
JWX Posted January 4, 2004 Author Share Posted January 4, 2004 I doubt its the cable. but I will check it when I get some time. and what it does is pops back up after I take my foot off of it when I shift like a bad return spring. one other thing I was thinking it might be is the PP would that do this kind of thing? which is why I think its the HH. I'm not saying its not the cable I'm not discounting your help I just really don't think its the cable as the one I replaced was the factory one. and I didn't even see how you could route the cable ABOVE the steering column. (and reading my first post I didn't explain it that well for that I'm sorry) Link to comment Share on other sites More sharing options...
JWX Posted January 6, 2004 Author Share Posted January 6, 2004 bump Link to comment Share on other sites More sharing options...
JWX Posted January 8, 2004 Author Share Posted January 8, 2004 ok is there away to take off the HH? and just put a spring on t it and bump Link to comment Share on other sites More sharing options...
Qman Posted January 8, 2004 Share Posted January 8, 2004 It's not the HH. They leak and fail but I have yet to see one bind up. It is in the pedal. You need to lube it. The pedal has two springs on it I believe(if it's a turbo)(one if not). Squirt some sort of lube around the pedal pivot and see if it helps. If it does you may want to disassemble the pedal assy and use some lithium grease to lube it all up. Make sure the clutch cable is routed under the steering column in the engine compartment. That is one of the most frequent mistakes I see on Subarus. People route them over the column and they wear out prematurely. Link to comment Share on other sites More sharing options...
JWX Posted January 8, 2004 Author Share Posted January 8, 2004 ok, checked the clutch cable and thats routed right. on lubing up the pivot would WD-40 work for that? and I don't have any springs on the clutch pedal just the brake pedal. BTW just to make sure ya'll know this is my hatch, the turbo thing kind of threw me off Link to comment Share on other sites More sharing options...
baccaruda Posted January 8, 2004 Share Posted January 8, 2004 the WD will work but it won't last as long as something more viscous. if you do end up taking it apart, maybe go to the stealership and buy new bushings for the pedal pivot rod. Link to comment Share on other sites More sharing options...
JWX Posted January 8, 2004 Author Share Posted January 8, 2004 ok sprayed some WD-40 on last night and took it for a ride today and I didn't notice it. so I'm thinking that might be it thanks for every body who helped Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now