Jerry DeMoss Posted December 13, 2008 Share Posted December 13, 2008 (edited) Really nice looking intake! You may want to try soda blasting the carbs instead of bead blasting. It is much easier on the parts and it just washes off with water. Also another trick I used is to use a old tooth brush along with some creme hand cleaner with pumice in it and scrub the parts that need attention with it and then wash them off with water. Edited December 13, 2008 by Jerry DeMoss Link to comment Share on other sites More sharing options...
kiwi subbie Posted January 9, 2009 Author Share Posted January 9, 2009 (edited) YAY shes running again:headbang: Every thing just kept goin wrong today and yesterday I couldnt seem to start it then i relised the plug that hooked up to the ignion switch, some how become disconected. I hooked that up then it did this had it backfiring though the carb. some how the HT Leads where all mixed up. Dont know how that happend Edited January 9, 2009 by kiwi subbie Link to comment Share on other sites More sharing options...
waimaks Posted March 6, 2009 Share Posted March 6, 2009 Hey James, just looking at some pictures of your carbs there. On the drivers side of the throttle linkage, what does it rotate on? I have got some dual carbs and I'm missing this bit, and where does the throttle cable secure. You wouldn't be able to get some pictures of the linkages to help me make them up? Link to comment Share on other sites More sharing options...
kiwi subbie Posted March 7, 2009 Author Share Posted March 7, 2009 Hey James, just looking at some pictures of your carbs there. On the drivers side of the throttle linkage, what does it rotate on? I have got some dual carbs and I'm missing this bit, and where does the throttle cable secure. You wouldn't be able to get some pictures of the linkages to help me make them up? Yeas dude i take some pixs 4 ya. What size motor are the dual carbs 4? Link to comment Share on other sites More sharing options...
waimaks Posted March 7, 2009 Share Posted March 7, 2009 I think they're ea71 ones. I got them mounted up today with a bit of fiddling around. It runs really bad, I have no air filters, and the throttle cable mount is a pair of vice grips.... Link to comment Share on other sites More sharing options...
kiwi subbie Posted March 17, 2009 Author Share Posted March 17, 2009 heres some pics hope it helps . if you need better 1s just say what of... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now