Love_em_when_there_old Posted July 6, 2008 Share Posted July 6, 2008 So My Front left Drive Axle is blown on my 2 door 85 GL EA81. So my Question is, Will a Front left Drive Axle fit my Tranny from an EA82 86 5 speed Gl wagon, mines a 4 speed:) Link to comment Share on other sites More sharing options...
GeneralDisorder Posted July 6, 2008 Share Posted July 6, 2008 No - EA82 axles are too long. The transmission type has less to do with it than the track width of the body. EA81 axles are shorter. GD Link to comment Share on other sites More sharing options...
MilesFox Posted July 7, 2008 Share Posted July 7, 2008 any other ea81:banana: axle will work. left and right are both the same Link to comment Share on other sites More sharing options...
Love_em_when_there_old Posted July 7, 2008 Author Share Posted July 7, 2008 Is there a good guide out there that can help me with the removal of the axle then? Link to comment Share on other sites More sharing options...
Spiffy Posted July 7, 2008 Share Posted July 7, 2008 Is there a good guide out there that can help me with the removal of the axle then? yes! follow the links from thus USRM page: http://www.ultimatesubaru.org/forum/showthread.php?t=75786 --Spiffy Link to comment Share on other sites More sharing options...
torxxx Posted July 8, 2008 Share Posted July 8, 2008 not only is length a problem bearing size is slightly different. a friend of mine had me try to put one on his car because he insisted he bought the right axle. After pressing the axle through the wheel bearings and ruining the bearings he believed me that they will NOT interchange Link to comment Share on other sites More sharing options...
GeneralDisorder Posted July 8, 2008 Share Posted July 8, 2008 EA81 and EA82 front wheel bearings are identical. They are both 6207 C3's, and either axle will fit either knuckle just like it's supposed to be there. The difference is mainly the length and the sizes of the joints. GD Link to comment Share on other sites More sharing options...
Love_em_when_there_old Posted August 1, 2008 Author Share Posted August 1, 2008 Just got around to doing this, 6 hours laterrrrrrrrr its done, nothing would come off. So we took of the strut and pulled the assembly away from the Drive axle, god that was a royal PITA! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now