greenleg88 Posted July 29, 2008 Share Posted July 29, 2008 mine need some adjustment... there is more pressure coming out of one hole than the other... there are two holes in each nozzle. the left nozzle works fine. the right nozzle, the far hole shoots out with more pressure. how can i adjust it to be equal and aim higher on the windshield? Link to comment Share on other sites More sharing options...
Rooster2 Posted July 29, 2008 Share Posted July 29, 2008 I have never tried this on a Subie, but when this would occur on my old VW, I would use a needle or shirt pin to clean out the nozzle hole. Both are rather small in diameter. Just insert the needle or pin a few times in the nozzle would clean out the built up crud. Test the squirter for improved performance, reclean if needed. Link to comment Share on other sites More sharing options...
EVOthis Posted July 29, 2008 Share Posted July 29, 2008 or if you have compressed shop air you could just unhook the line for it and give her a squeeze up there.....works for me..... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now