OC_subiewrench Posted September 2, 2008 Share Posted September 2, 2008 Hello , I'm looking for any info I can get on having my '07 impreza 2.5i ECM reflashed for more performance. I know that it's possible for the WRX and STi so I'm hoping that somewhere out there theres a company that does it for N/A cars. I have a spare ECM to send to them so I'm not worried about damaging it. Any help would be appreciated. Link to comment Share on other sites More sharing options...
Pooparu Posted September 2, 2008 Share Posted September 2, 2008 you can try this guy. http://www.thewerkstatt.com/ Link to comment Share on other sites More sharing options...
subaru360 Posted September 2, 2008 Share Posted September 2, 2008 Buy a cable and do it yourself. Go to: http://www.romraider.com for editing software http://www.openecu.org for flashig software http://www.tactrix.com for a cable Link to comment Share on other sites More sharing options...
rllywgn Posted September 2, 2008 Share Posted September 2, 2008 a lot of the guys in the local subie club here have done "open source" tuning.. apparently very effective way of tuning.. post up on and ask.. theres quite a few base maps to work with and they have had a ton of success. I dont know too much about it being that i have the oldest car in the club and just havent looked into it.. plus i think they have a new york / tri-state chapter.. Link to comment Share on other sites More sharing options...
OC_subiewrench Posted September 3, 2008 Author Share Posted September 3, 2008 Thanks guys ! Good info! Link to comment Share on other sites More sharing options...
rllywgn Posted September 3, 2008 Share Posted September 3, 2008 snap.. my hyperlink didnt show up.. www.flat4lv.com theres a ton of guys there with open source tuning.. and i dont think you have to be without your ecm.. Link to comment Share on other sites More sharing options...
Hondasucks Posted September 4, 2008 Share Posted September 4, 2008 be VERY CAREFUL you can easily fry the ECM, or cause engine damage if you don't know what you are doing. I'd recommend only reflashing it with firmware that has been dyno tested by a reputable tuning shop. On a side note, I noticed the other day that the Subaru laptop at work, in the FlashWrite program, it suports JDM/EDM firmware in addition to USDM firmware, but unfortunately Subaru doesn't send us the JDM or EDM firmware files Link to comment Share on other sites More sharing options...
OC_subiewrench Posted September 5, 2008 Author Share Posted September 5, 2008 Greetings fellow tech. Where would one look for such proven firmware? The idea of remapping my own ECM , even if I have a spare is still frightening.. Link to comment Share on other sites More sharing options...
Subarutex Posted September 5, 2008 Share Posted September 5, 2008 The modern ECU's should be good for upwards of 1000 flashes, if not way more than that. You can't fry (ie let them magic smoke out) the ecu by flashing it. You could perhaps corrupt the data on the chip and render it useless. Given that you have a 2nd ecu, go ahead and try it. I've met some very low IQ people (with sti's) that have managed to flash their cars, so I'm confident that just about anybody can do it if they follow the steps. For an experts advice, contact Dominic at http://www.getadomtune.com He is local to WA, but will talk to and help people from all over! He might even have a map to help get you started. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now