glh1975 Posted September 15, 2008 Share Posted September 15, 2008 I have a chance to get a couple weber32/36 DGV-5A carbs.They came off an old Datsun.If I got them and bought a adapter plate seperate is there any reason they shouldn't work on my car.I also have a 1979 DL front wheel drive I'd like to put the other on.Or would I be better off just getting the kit from Redline.What does everybody think? Link to comment Share on other sites More sharing options...
()__1337_CRAYOLA__()> Posted September 15, 2008 Share Posted September 15, 2008 check the jets to make sure they are right (other people on the board could tell u better what jets to use) maybe rebuild it if it looks well used and u sould be good that is if they are more expensive then the redline kit Link to comment Share on other sites More sharing options...
hatchsub Posted September 15, 2008 Share Posted September 15, 2008 Your going to have to rejet it most likely. Here are the jets that you need for the 1.8. 140/140 mains 160/170 air correctors 50/55/60 for primary idle jet, secondary is fine at 50. I think i covered everything correctly. If I mixed something up im sure GD or someone else will pipe up. Link to comment Share on other sites More sharing options...
glh1975 Posted September 16, 2008 Author Share Posted September 16, 2008 Well,I bought a 32/36 DGAV on ebay for $63.If it doesn't end up needing rebuilt should it work with the right adapter plate on my '87 wagon? Link to comment Share on other sites More sharing options...
Jerry DeMoss Posted September 16, 2008 Share Posted September 16, 2008 Your going to have to rejet it most likely. Here are the jets that you need for the 1.8. 140/140 mains 160/170 air correctors 50/55/60 for primary idle jet, secondary is fine at 50. I think i covered everything correctly. If I mixed something up im sure GD or someone else will pipe up. Yep that is correct. I have found that alot of cars use the same idle jets but the mains are usually different along with the air correctors. Link to comment Share on other sites More sharing options...
bigjim5551212 Posted September 18, 2008 Share Posted September 18, 2008 if you need any parts, give me a call 1-800-665-5031 Jim Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted September 18, 2008 Share Posted September 18, 2008 Hey Weber guys I got a Weber on my 2.2EJ what jetting would you recommend , I want the hightest lowend power I can get thanks Scott Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now