kingbobdole Posted January 3, 2009 Share Posted January 3, 2009 I did mine differently... I got a stock WRX whole linkage... the "stay" was kept stock but the shifter was shortened... and I used a really classy "U" clamp on the back side of it.. Then I used 2wd stuff to make it look "stock" Link to comment Share on other sites More sharing options...
Subarutex Posted January 4, 2009 Share Posted January 4, 2009 Tex, I'm still failing to see why you had to change the end of the linkages where it goes onto the tranny from the bracket end to the barrel end. Maybe I'm missing something there? You can see in one of my pictures in this thread http://www.ultimatesubaru.org/forum/showthread.php?t=81260 that I had a barrel coming straight off the tranny, and a double bracket piece attached to that. So I needed a barrel to fit into the other side of that double bracket. Perhaps your USDM stuff is different, I don't know. I just know what worked for me. Kingbobdole, is there a reason why you opted to bolt the shift stay on top of the tunnel as opposed to below it? Link to comment Share on other sites More sharing options...
kingbobdole Posted January 5, 2009 Share Posted January 5, 2009 Kingbobdole, is there a reason why you opted to bolt the shift stay on top of the tunnel as opposed to below it? I had some clearance issues with the drive shaft.... as in, it hit it. No idea why, that was just my solution. Link to comment Share on other sites More sharing options...
Subarutex Posted January 5, 2009 Share Posted January 5, 2009 Makes sense! Mine right now is close to the driveline, but doesn't hit it. The old linkages used to hit it on certain shifts. Link to comment Share on other sites More sharing options...
Caboobaroo Posted January 6, 2009 Author Share Posted January 6, 2009 So I'm hoping to get the tranny back into the car tomorrow. Tex if you have time, wanna come get that tranny? Link to comment Share on other sites More sharing options...
Subarutex Posted January 7, 2009 Share Posted January 7, 2009 So I'm hoping to get the tranny back into the car tomorrow. Tex if you have time, wanna come get that tranny? You have a PM. Link to comment Share on other sites More sharing options...
Caboobaroo Posted January 9, 2009 Author Share Posted January 9, 2009 You have a PM. Was there until 10 and you didn't show:confused: Anyways, I've had a bit of a problem... well a pretty decent sized problem. My XT6 tranny crossmembers turned out to not be from a XT6 but from a EJ car of some sort from the look of them. I compared them to the EJ set I already have and guess what...... So there went the ease of the tranny install for last night. I'll figure something out but if Rob is reading this... you might wanna go look for something again for me:brow: After that dilema and getting a bit pissed at the fact that I didn't think of comparing them before I got the tranny on a jack to put it up into the car (the car be on a lift, you'll see), I decided to tear into the factory harness to get it out of the car to start stripping/merging. Looks like it'll be a walk in the park for the most part. I have pics though of its current state. Pretty sad though:rolleyes: Link to comment Share on other sites More sharing options...
Subarutex Posted January 9, 2009 Share Posted January 9, 2009 Sorry Bud, you're PM's to me made it sound like you weren't for sure on your buddy being able to stay. I PM'd you to clarify, but I didn't hear back. Hit me up so we can try this again. Link to comment Share on other sites More sharing options...
Caboobaroo Posted January 9, 2009 Author Share Posted January 9, 2009 Sorry Bud, you're PM's to me made it sound like you weren't for sure on your buddy being able to stay. I PM'd you to clarify, but I didn't hear back. Hit me up so we can try this again. Sorry man, we will get it done! Link to comment Share on other sites More sharing options...
carfreak85 Posted January 9, 2009 Share Posted January 9, 2009 Your car looks pretty... I want an EJ-RX.... Link to comment Share on other sites More sharing options...
Subarutex Posted January 9, 2009 Share Posted January 9, 2009 Your car looks pretty... I want an EJ-RX.... I happen to know someone that has one for sale Let me know the next time you are there, I'll try my hardest to make it happen! Link to comment Share on other sites More sharing options...
Caboobaroo Posted January 9, 2009 Author Share Posted January 9, 2009 I happen to know someone that has one for sale Let me know the next time you are there, I'll try my hardest to make it happen! I'm gonna try for this weekend, maybe on Saturday afternoon or something. Need some $$ for some new boots for Firestone:rolleyes: Galen, after what happened the other night with parts not fitting and the parts I am still missing, makes me kidna irritated at this whole project. I'm just stressed at watching this thing sit here since I don't have the funds quite yet to just get everything and finish it right now, I'm loosing my motivation.:-\ I did like 30 minutes worth of work in 2 hours because of the lack of motivation after the tranny crossmembers didn't fit. I will, however, get this damn harness out by the end of the weekend, even if I have to do it outside of the shop. Then I can get them merged and back into the car:banana: Link to comment Share on other sites More sharing options...
Subarutex Posted January 10, 2009 Share Posted January 10, 2009 I'm gonna try for this weekend, maybe on Saturday afternoon or something. Need some $$ for some new boots for Firestone:rolleyes: Galen, after what happened the other night with parts not fitting and the parts I am still missing, makes me kidna irritated at this whole project. I'm just stressed at watching this thing sit here since I don't have the funds quite yet to just get everything and finish it right now, I'm loosing my motivation.:-\ I did like 30 minutes worth of work in 2 hours because of the lack of motivation after the tranny crossmembers didn't fit. I will, however, get this damn harness out by the end of the weekend, even if I have to do it outside of the shop. Then I can get them merged and back into the car:banana: I'll be in Redmond tomorrow afternoon at some point for a family gathering. I could probably swing by and at least give you the cash. I just don't know what time... anyway to get ahold of you thats not PM? Link to comment Share on other sites More sharing options...
Caboobaroo Posted January 10, 2009 Author Share Posted January 10, 2009 I'll be in Redmond tomorrow afternoon at some point for a family gathering. I could probably swing by and at least give you the cash. I just don't know what time... anyway to get ahold of you thats not PM? eh I wish but not until I can get my phone turned back on which will be another month or so:-\ Link to comment Share on other sites More sharing options...
Caboobaroo Posted January 24, 2009 Author Share Posted January 24, 2009 So I'm bumpin this up for good news! Today I went to Aaron's Auto Wrecking in Seattle and got the needed parts to hopefully finish my swap. I got the XT6 manual AWD crossmembers for the tranny, EJ22T MAF and the 90* that comes off of it and the piping that goes from the turbo to the TB. So now I can finish putting this stupid thing together when I get time. I'm also swapping the 3.7LSD for a 3.9VLSD for a perfect gearing match for the car. Now I just need to get the driveline shortened (which will be reaaaaal soon) and get everything put together! Link to comment Share on other sites More sharing options...
Subarutex Posted January 24, 2009 Share Posted January 24, 2009 Let me know the next time you are there working on it... i'll come give you some cash! I'm stoked to see you making progress. We'll have to talk coilovers.... Link to comment Share on other sites More sharing options...
Caboobaroo Posted January 24, 2009 Author Share Posted January 24, 2009 Let me know the next time you are there working on it... i'll come give you some cash! I'm stoked to see you making progress. We'll have to talk coilovers.... I'll probably be there next Wednseday gettin the EJ tranny in and pulling the rear diff so I can make my swap. Link to comment Share on other sites More sharing options...
Subarutex Posted January 24, 2009 Share Posted January 24, 2009 Word, I'll roll by then. Link to comment Share on other sites More sharing options...
Caboobaroo Posted January 27, 2009 Author Share Posted January 27, 2009 Word, I'll roll by then. SO I might not be there. I have to work until 7ish so I don't know if I'll work on it then. If you still wanna roll by though, I work just a couple buildings away and can see about making sure there's access to the tranny... Link to comment Share on other sites More sharing options...
subaruguru Posted January 27, 2009 Share Posted January 27, 2009 cant wait to see this puppy i think the dl lights would look sick on that car Link to comment Share on other sites More sharing options...
kingbobdole Posted January 28, 2009 Share Posted January 28, 2009 Is this thing done... YET? Link to comment Share on other sites More sharing options...
Caboobaroo Posted January 28, 2009 Author Share Posted January 28, 2009 Is this thing done... YET? Ha, I wish:-\ Working two jobs kinda takes its toll though on spare time. I'm finally getting money to finish it though! Subaruguru, no DL lights for me. I'm going with a different set but its kind of a secret on what I wanna use;) Link to comment Share on other sites More sharing options...
subaruguru Posted January 28, 2009 Share Posted January 28, 2009 Ha, I wish:-\ Working two jobs kinda takes its toll though on spare time. I'm finally getting money to finish it though! Subaruguru, no DL lights for me. I'm going with a different set but its kind of a secret on what I wanna use;) sweet like i said i cant wait to see it Link to comment Share on other sites More sharing options...
Numbchux Posted January 28, 2009 Share Posted January 28, 2009 naw, the DL lights look awesome on an offroader. but I don't think they really work on a lowered car. I wanted a set so bad for my old blue '88 wagon. but hvae no desire to do that to the Frankenwagon. Link to comment Share on other sites More sharing options...
Caboobaroo Posted March 27, 2009 Author Share Posted March 27, 2009 So its been a couple long months of no time to work on the car. I work 2 jobs and lemme tell you, the spare time I do have, has been spent doing other work, like packing to move once again. Good think its across town and not halfway across the friggin country this time. So since I worked on it last, she's sat and making me depressed. Most of you probably seen the part out thread I had posted a few weeks back but decided finally against it. But a bit of an update! Got the 3.9 VLSD I got from The Scooby in along with some good rear axles. Also, I have the XT6 crossmembers as well, just need to modify the rear one to bolt into the car. Just gotta get the tranny in then its all downhill. Also had to replace the front wheel bearings since the old ones didn't like being rolled around without axles in:rolleyes: I still got a few small things to do to the engine itself, evap the AC, install the radiator with fans, get the wiring in and get the driveline made and I should be good to go:banana: Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now