aussiebrock Posted October 1, 2008 Share Posted October 1, 2008 someone please help me!!! i seem to be the only P plater in the world (or WA) who doesnt have the front end of my 1800 wagon lifted!?!?. i dano if i need new springs or something but my cousin recons theres a way to lift it by a minor adjustment? any ideas people? would be much apreciated... Link to comment Share on other sites More sharing options...
s'ko Posted October 1, 2008 Share Posted October 1, 2008 depends on how high you want to lift it. Also depends on the model that you have EA82 or EA81. EA81 4wds have a height adjuster in the spring perch. Not sure about Ea82s. This will give you about an inch or so. Anything more and you will have to use lift blocks. Link to comment Share on other sites More sharing options...
cobcob Posted October 1, 2008 Share Posted October 1, 2008 Worth noting that if ya crank up the perch on the front's it'll throw your camber out a bit. Incidentally, Mykingcrab and I over here in Missouri, USA are both running P Plates on our Subies just for fun... He's got a lifted RX sedan and I'm running a stock Brat/Brumby... Link to comment Share on other sites More sharing options...
Mugs Posted October 2, 2008 Share Posted October 2, 2008 someone please help me!!! i seem to be the only P plater in the world (or WA) Welcome. I have a friend who lives in W. Perth...just bought an 08 Forester..... And for the un-informed, aussiebrock does not mean Washington State when he says "WA", he means Western Australia, which is where Perth is. Just had to clear that up before too many got confused there mate. Cheers. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now