86subaru Posted November 22, 2008 Share Posted November 22, 2008 went to order new front axles for my 97 awd a/t 2.2 motor, legacy, and for my 95 legacy awd 2.2 a/t both wagons, my question is are the front axles both the same from 95 to 97? according to carquest they are different , i was thinking they were the same , thanks, Link to comment Share on other sites More sharing options...
johnceggleston Posted November 22, 2008 Share Posted November 22, 2008 i'm pretty sure they are the same. i've swapped them before. there is a difference between FWD and AWD, but they both will fit. i think the FWD axle has a thicker shaft. if the manufacturer used a different part number due to some slight modification the parts house may not know they are the same. check out the new parts site for cross reference. http://opposedforces.com/parts/ Link to comment Share on other sites More sharing options...
jp98 Posted November 22, 2008 Share Posted November 22, 2008 I would forget about Carqwest for replacement axles or any aftermarket one from what I have heard. They just don't hold up as the story goes. When I replaced them on my Outback I got them from MW Enterprises. They are the way to go other than the dealer. Jim Link to comment Share on other sites More sharing options...
86subaru Posted November 22, 2008 Author Share Posted November 22, 2008 yes on mw no place local sells them , life time warranty , new , no core charge, thats what i was thinking 95 awd and 97 awd are the same, Link to comment Share on other sites More sharing options...
screwbaru2 Posted November 23, 2008 Share Posted November 23, 2008 I'd bet they are the same. I used 97 lego fronts in a 99 imp front both AT awd no issues. MWE is THE way to go. Got 2 new CV's front axles from MWE for my MT OBW 6k later no problems. You can't go wrong. Link to comment Share on other sites More sharing options...
86subaru Posted December 1, 2008 Author Share Posted December 1, 2008 found out today they are the same 95-97 awd a/t 2.2, thanks Link to comment Share on other sites More sharing options...
idosubaru Posted December 1, 2008 Share Posted December 1, 2008 all legacy axles are the same or interchangeable for more than a decade after inception. manual/auto/engine size doesn't matter. MWE can't be found locally, you order them. after market axles are complete junk. don't be surprised if you're asking axle questions again in the next year. personally i'd take them back and put the extra effort into calling and ordering from MWE. it actually saves time to order them. i like having parts on my front porch when i get home. 4 minute phone call, no driving, no waiting in line, done. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now