one eye Posted December 1, 2008 Share Posted December 1, 2008 Ok this might be a little hard to understand but here we go We got a 88 SPFI 4WD Wagon The fuel gauge seems to not work at all, it just goes to super E... like past E a 1/4" down. We replaced the dash, fuel gauge (in the tank) and checked for power. Does anyone else have any Idea what else to check for? Both dashes did the same thing......Went to E and below. I'm kinda out of Ideas.................... your 2 cent are needed!! Jeff Link to comment Share on other sites More sharing options...
subiemech85 Posted December 1, 2008 Share Posted December 1, 2008 replace the wires black tape Link to comment Share on other sites More sharing options...
one eye Posted December 1, 2008 Author Share Posted December 1, 2008 That's the next step. :-\ Jeff Link to comment Share on other sites More sharing options...
Caramanos2000 Posted December 2, 2008 Share Posted December 2, 2008 You can bang on your tank with a hammer and listen for a splash or use a broom handle Nah make sure you do have power, if you do try sanding and cleaning the terminals a little then replace wires. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now